Issues writing to DS1245Y from vt to vs

[tris909]

Tried other PCM still no go, tried to extract code with flash tool, no connection able. code verified in burner programe, how can I read it back through tunerpro?

[antus]

Jumpers on nvram board set to VS? RW jumper not set (for testing)?

[tris909]

yes set to vs and I will try without RW in now.

[antus]

Has the nvram worked for you before?

[tris909]

tried that and no go, yes was in a VT auto V6 had no issues with, have compared code back through tunerpro and its all spot on, I am absolutely lost now, as TP wont connect to vehicle either, running plugin 1.5 and all correct options selected. help ahaha, we need to do a car at work tomorrow. I may try another NVRAM out of my 808 and see what happens, will it be the same drill just burn the bin file to NVRAM ??

[Holden202T]

yep should be no different!

[tris909]

ok so tried NVRAM out of my 808, burnt 128kb bin file to NVRAM with 0000 offsets, computer still wont connect to vehicle or run on the NVRAM. car is 08/96 VS commodore V6.
have tried re-installing TP5 still no luck.

[tris909]

also swapped PCM and still same issue, I have never had this with TP , it wont connect to any vehicle.

[The1]

do you have a bog stock memcal you can chuck in and see if you can connect without oseplugin?

[tris909]

tried connecting with stock memcal and wont connect through TP or flash tool. had it running for about 3 seconds on last NVRAM burn but cant get damn computer paired with vehicle to tune and adjust.