VS V8 Auto question

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: VS V8 Auto question

Post by vs ss »

Just use the one under vr marked as "16183082 $12 version 1" from the quick look I've had it appears to be fine for the BWFW tune.
monaro308
Posts: 340
Joined: Sat Mar 21, 2009 2:02 pm
cars: VT S1 LS1 C/dore track car
HJ GTS Monaro Coupe
CV8 V2 S3
VE SSV

Re: VS V8 Auto question

Post by monaro308 »

Ok yeah I'm surprised no one has done a $5A
I'll give the 082 a go and see what I find.
Cheers all for your help :thumbup:
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: VS V8 Auto question

Post by Holden202T »

probably wasn't enough tunes around that are $5A .... so no one ever bothered, but your welcome to map it out :thumbup:
monaro308
Posts: 340
Joined: Sat Mar 21, 2009 2:02 pm
cars: VT S1 LS1 C/dore track car
HJ GTS Monaro Coupe
CV8 V2 S3
VE SSV

Re: VS V8 Auto question

Post by monaro308 »

I'm having a play with my mates VS 5lt manual track car and ive used a VR V6 512k memcal,done the netres mod,UV'd it,burnt the 12P BLCF stacked file on to it.
I have disabled the anti-theft in both map A and B for VS models and also set the "disable anti-theft control module" in both maps A and B.

It burns fine but i verify i get an error message
error.JPG
error.JPG (177.25 KiB) Viewed 3023 times
I checked the original 12P file against the vats modded 12P file of mine and the above 2 boxes are the difference in HXD.
Is this normal or am i doing something wrong?
i'm using the old skool willem parallel programmer.
cheers
Post Reply