hi im having problems burning my 32bit tune to a 27SF512 chip it keeps failing in verifying chip im using burn 2
iv tryed 3 chips all have same problem and turner pro bin stacking with no luck
27SF512 burning problems
Re: 27SF512 burning problems
Are you stacking the bin first?
Re: 27SF512 burning problems
i bin stack then burn to chip
Re: 27SF512 burning problems
how are you stacking it? should be bin size 32k chip size 64k block size 32k ?
stacked file should be 64k in size?
stacked file should be 64k in size?
Re: 27SF512 burning problems
yes same as above
-
- Posts: 40
- Joined: Sun May 22, 2011 1:26 pm
- cars: VT S/C V8 Clubsport Gas injected
VQ 6L stato Gas injected (un finished project)
VR 5L stato Gas injected
HZ T/Ramed straight gas
EK 202 straight Gas injection run of a v6 delco computer
VP V6 worked with bug catcher (sold)
VH V8 straight gas (sold)
Re: 27SF512 burning problems
ive had issues in the past with some 27sf512 chips that would not burn in my moates chip burner (my chips were from jaycar and worked well but then I had a batch from jaycar that didn't work in the moates but work fine in he gq4x), do a chip erase and then read the chip if it is not blank (all FFF's) then the chips you have got aren't compatible with the burn 2, try them in a gq4x and they will probably work
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 27SF512 burning problems
Also depends where you got the chips from. Lots of flat out forgeries where none of them write properly in batches on ebay. Its hard to get real and working ones now.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396