Writing to ls1 flash chip.
- Antwon
- Posts: 101
- Joined: Mon Aug 24, 2015 1:14 pm
- cars: vx ss. 80 series daily, vk ls1 (project)
- Location: arcadia vale nsw
Writing to ls1 flash chip.
Just a quick question has anyone successfully wrote a ls1 bin file to a new flash chip. ? Ive tried and tried a few different bins and ways to write it to the chip but wen i go to read it in hp tuners it always comes up with and error that it cant read it but than ill put the factory chip on the board it reads straight away. Tried reading factory chip and than writing it straight back to the new chip un touched and still no go ?. I was hoping some one could shead some light on how they worked out how to do it. I looked thru the site for some info but havnt been successfully so sorry if this topic has been brought up beofre.
- Antwon
- Posts: 101
- Joined: Mon Aug 24, 2015 1:14 pm
- cars: vx ss. 80 series daily, vk ls1 (project)
- Location: arcadia vale nsw
Re: Writing to ls1 flash chip.
got it to work.. i was byte swapping the bin file with a second program to the gq-4x software so it wasn't writing properly byte swapped it in the gq-4x software and worked no problems at all