can't burn stacked bin
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
can't burn stacked bin
Hey
Fired up the GQ-4X today to burn a manual vn v8 bin for him. I stacked it using TP no issues, reads up OK in HxD
I am continually embraced by fail :
Write failed, Address=0x009800, Buffer=0x26 Device=0x04
Chip is a Winbond W27C512-45Z.
Tried it a heap of times. Tried different chips. Still embraced by the fail boat.
Any ideas please? Bad chip(s)?
Fired up the GQ-4X today to burn a manual vn v8 bin for him. I stacked it using TP no issues, reads up OK in HxD
I am continually embraced by fail :
Write failed, Address=0x009800, Buffer=0x26 Device=0x04
Chip is a Winbond W27C512-45Z.
Tried it a heap of times. Tried different chips. Still embraced by the fail boat.
Any ideas please? Bad chip(s)?
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: can't burn stacked bin
You said VN V8, Is it 12P (256k) or an old VN BIN (128k) ?
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: can't burn stacked bin
That error is normally caused by a poor erase.
Try doing just an Erase followed by a Blank Check.
Sounds like bad chips or poor contact to the ZIF
Try doing just an Erase followed by a Blank Check.
Sounds like bad chips or poor contact to the ZIF
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
dylan. original 128K bin
yoda. if i do quickly a read, erase, blank check, write. i've got it to do it. it gets to 10% slows, then, gets to 60% and hammers. like the old buffer underrun in the old CD burning days, remember that shit.
i then go back and re-read it and compare in HxD - and they are not identical.
there are a heap of 'y' in the ascii fields.
ps: i am using win10 here. just wondering ....
yoda. if i do quickly a read, erase, blank check, write. i've got it to do it. it gets to 10% slows, then, gets to 60% and hammers. like the old buffer underrun in the old CD burning days, remember that shit.
i then go back and re-read it and compare in HxD - and they are not identical.
there are a heap of 'y' in the ascii fields.
ps: i am using win10 here. just wondering ....
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: can't burn stacked bin
Try changing the write speed from +2 to 0 and see if that helps.
I've also tried double write on some chips as well.
Seems strange to have it slow down and speed up, if you're running Win10 would assume computer isn't ancient.
I've also tried double write on some chips as well.
Seems strange to have it slow down and speed up, if you're running Win10 would assume computer isn't ancient.
Re: can't burn stacked bin
Out of interest are you stacking it 4 times? Apart from that I'm out. Id try another memcal?
I can send you one if needed might even have a 128k one here. If not I have a few EEPROM's here.
I can send you one if needed might even have a 128k one here. If not I have a few EEPROM's here.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
yoda. yeah tried that too mate.
ok: re double write.....though as it fails you try to write again and it says to GTFO
i know.....nah i5-760 previous gen.
tried on wifes win7 laptop. same deal
dylan yah, stack x 4 using TP............16KB 64KB 16KB
i on my 2nd chip here. might take u up on that buddy
ok: re double write.....though as it fails you try to write again and it says to GTFO
i know.....nah i5-760 previous gen.
tried on wifes win7 laptop. same deal
dylan yah, stack x 4 using TP............16KB 64KB 16KB
i on my 2nd chip here. might take u up on that buddy
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: can't burn stacked bin
Hit me up if you need to. Also I installed an update long time ago on Windows 10. Although it was working before hand anyway.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
dylan - re: update ---> what was it do you know?
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: can't burn stacked bin
Was from there website. When you fire up there program it says checking fir updates but doesn't find any. Now that I think about it it wasn't working on Win 10 first up.