can't burn stacked bin
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
yeah. thought that was driver only though for win10.
i have 6.38 of the software. finds the thing just fine no issues. well sometimes ... is mostly good.
i have 6.38 of the software. finds the thing just fine no issues. well sometimes ... is mostly good.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
right. its only writing 16KB. even though i stack the bins ; and the file is 64KB, when you read the chip in HxD it only gets to 00001FF00 --> after that, 00002000 is dead. all 'FF' or 'y' in ASCII
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: can't burn stacked bin
Just looked on my laptop I'm running 6.37. Found a VN memcal here I just put it in the eraser. Send me your BIN un stacked and I'll try and burn it.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
Dylan, its AFUA ; download/file.php?id=113
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: can't burn stacked bin
Well that was interesting. I upgraded Windows a few days ago. Had to re install the USB driver so then decided to upgrade to 6.38.
I burnt the linked file to a 128k VN memcal. Ill attach the read back it verifies with HxD ok.
If you want it PM your address and Ill send it off Monday.
I burnt the linked file to a 128k VN memcal. Ill attach the read back it verifies with HxD ok.
If you want it PM your address and Ill send it off Monday.
- Attachments
-
- afuareadback.bin
- (16 KiB) Downloaded 286 times
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: can't burn stacked bin
ya. pretty sure these chips are fakes. all fucked.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: can't burn stacked bin
Are you using the usb lead gq4x came with , ive had similar problems with cheap shit usb leads
Does the chip id ok
Does the chip id ok
Re: can't burn stacked bin
can you ID the chip? can be bad contact
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: can't burn stacked bin
Sounds most likely to be bad chips. Hard to find good ones these days. The bad ones ive seen do exactly as describe, fast and slow patches on the chip then fail readback. Drivers etc tend to be all or nothing, not this type of failure. Electronic erase chips tend to erase reliably, unlike the uv erase style chips which can take more work (longer) and a couple of attempts to finally erase the stubborn bits.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: can't burn stacked bin
The one I burnt was an intel 128k eprom. First intel I've come across.