Has anyone seen or used one of there units.
http://www.futurlec.com.au/EPROMEmulator.jsp
Price is reasonable for an emulator but will it work in a Delco.
I am unable to find any info on the unit that I can read.
EPROM Emulator
EPROM Emulator
Don't make excuses. Make more horsepower.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: EPROM Emulator
It'll work for the emulation side, but getting anything to talk to it from the pc will be the problem.. it states dos software (which presumably also means type your address, type your data, hit 'send to prom'.. ok that was one raw byte.
You could use it with TP if you can decode the protocol, or its in the manual and you can write a TP5 plugin.
You could use it with TP if you can decode the protocol, or its in the manual and you can write a TP5 plugin.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: EPROM Emulator
I bought one of those about 4 years ago and wasnt very impressed with it .
You can use it on win xp but you have to use a program called port talk with it(included in software).
It would not work at first but with a few simple mods it will work on a delco.
It has no batt backup so when you turn ign off you loose the bin on the ram.
It will not work with tunerpro
Dont waste your time with it ,the extra money spent on a ostrich is money well spent .
Also i could only get it to work on one of five pcs i had at the time no matter how i set the printer port .
You can use it on win xp but you have to use a program called port talk with it(included in software).
It would not work at first but with a few simple mods it will work on a delco.
It has no batt backup so when you turn ign off you loose the bin on the ram.
It will not work with tunerpro
Dont waste your time with it ,the extra money spent on a ostrich is money well spent .
Also i could only get it to work on one of five pcs i had at the time no matter how i set the printer port .
Re: EPROM Emulator
OK I won't be wasting my money then.
Thanks for the advice
Thanks for the advice
Don't make excuses. Make more horsepower.
Re: EPROM Emulator
Ive gotta laugh how theyve written SPECIAL INTRODUCTORY PRICE $102 ,i bought mine 4 years ago for $129 from memory .
Hardly introductory.LOL
Hardly introductory.LOL
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: EPROM Emulator
maybe it should read, discontinued stock runout price ??
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread