Has anyone successfully read 16-bit EPROMS with their Willem GQ-4X? I thought I read a thread here about some troubles but couldnt find it.
I'm trying to read an AT27C1024 using a PLCC44 to DIP40 adapter, already patched DIP:13/DIP:30 to PLCC:12/PLCC:34 as the DIP pins were wired to the NC pins on the PLCC but still no dice.
Thinking I might order a TL886 to try as Ive given away my Willem PCB3.
- Board index Hardware Chip/Memcal Reading/Writing
- Search
-
- It is currently Wed Apr 24, 2024 7:40 am
- All times are UTC+10:00
Willem GQ-4X 16-bit EPROMS
EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Return to “Chip/Memcal Reading/Writing”
Jump to
- Computers
- ↳ GM LS1 512Kbyte and 1Mbyte and newer
- ↳ Holden ALDL ECUs
- ↳ US ALDL ECUs
- ↳ Euro GM ECUs
- ↳ Ford ECUs
- ↳ Bosch ECUs
- ↳ Delco ECU Conversions
- ↳ Engineering and Reverse Engineering
- ↳ Custom Code
- ↳ Hardware/Bin Feature suggestions
- Tools
- ↳ Tools
- ↳ Tool Development
- Hardware
- ↳ Hardware
- ↳ Hardware Modification and Development
- ↳ Wiring
- ↳ Chip/Memcal Reading/Writing
- Tuning
- ↳ ALDL, OBDII Logging and Scanning
- ↳ General Tuning Discussion
- ↳ Realtime Delco Tuning
- ↳ Other Tuning
- ↳ Tunerpro
- Other
- ↳ For Sale
- ↳ Wanted
- ↳ Members Rides
- ↳ Other Rides
- ↳ Engine/Transmision Mechanical
- ↳ Off Topic