TL866II+ds1245y programming
TL866II+ds1245y programming
hi guys ill give you the story of the issues im having just got my self a new tl866II plus programmer as my old desktop i had for programming decided to split the water cooler open and fry its self meaning i lost my ltp ports so i cant use my old willem pcb . now problem im having is i have 2 nvrams my one and a mates one here. my mates one he had for ages but never used it then when we finally got around to using it nothing no fire fans on right so i verified the nvram was the issue as mine worked in the ecu connected and started so figured possibly nothing was programmed before i had been sent or the battery went flat? and lost the info. so i used mine for a bit did some soldering and dropped some solder on to my nvram didnt realize tried to start same problem as the original one light on fans on no start no connection figured same deal hopefully. now got the programmer programmed them both have tried stacked and unstacked with both with no offset verifies fine reads back fine but still fans come on and check light with both of them map jumper on and off. im stumped as to where to go next im thinking maybe i fried a resistor or the tantalum capacitor on my nvram board but the ds1245y from mine still doesnt work in my mates and vica versa. can possibly have 2 dead boards and ICs
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: TL866II+ds1245y programming
What program are you using 12p? If so just burn the 128kb stacked 12p bin to the nvram with no offset and plug on a memcal and see if it goes instant fans at key on.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: TL866II+ds1245y programming
Also with the tl866 there's 2 versions of ds1245y you can choose one is called "test" obviously that one won't program the nvram its just a pin test choose the other ds1245y listing
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: TL866II+ds1245y programming
Sorry forgot to say I’m using 12p have tried stacked and unstacked. That did catch me out for about 20mins with the test ds1245y. It programs and reads back fine with both but still fans come on also when I try to program the stacked bins the first section is just 00
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: TL866II+ds1245y programming
Yeah 12p is 32kb so you have 32k padding with 00, 32k of 12p, then the same again total of 128kb.
Take the RW jumper off and test again, it could be a problem on the rw line so data is being saved to the nvram where it should be reading instead. if it works with RW jumper off, check the wiring. Also try reading it after its been through the car and see if it still verifies.
Take the RW jumper off and test again, it could be a problem on the rw line so data is being saved to the nvram where it should be reading instead. if it works with RW jumper off, check the wiring. Also try reading it after its been through the car and see if it still verifies.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: TL866II+ds1245y programming
I’ll try with the rw jumper off. I did try and read them after trying them in the car to see if for some reason they where getting corrupted but read fine and difference tool picked up nothing different between a standard 12p bin and the one I programmed onto the ICs
Re: TL866II+ds1245y programming
Sounds like your NVRAM chip is OK. Do you have an original memcal to make sure your ECU is working?
Joe.
Joe.
Re: TL866II+ds1245y programming
Ecu works fine with another memcal in it still haven’t tried with write jumper off been flying around WA with couple of aviator clubs
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: TL866II+ds1245y programming
Im assuming they are, but just to be sure - are they definately genuine nvrams?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: TL866II+ds1245y programming
100% genuine or mine is at lease and I’d say my mate on is as well as it’s neverbeen used until now and is a genuine pcmhacking board I maybe doing something stupid with the programmer but I don’t know