vn/vp memcal

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Post Reply
damo702002
Posts: 14
Joined: Fri Dec 02, 2016 3:16 pm

vn/vp memcal

Post by damo702002 »

Hi all.

Dummy question......are the vn/vp memcals the same as a vr memcal????

only ask as I have a previously done memcal for boost and wondered if it can go into my vr????

cheers
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: vn/vp memcal

Post by vlad01 »

VR ones are different, the ERPOM is 4? times the capacity as the VN/VP ones.


You could stack it for the VR presuming its a manual with 082 or 305 ECU, 424 auto ECU is a no go.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
damo702002
Posts: 14
Joined: Fri Dec 02, 2016 3:16 pm

Re: vn/vp memcal

Post by damo702002 »

Thanks for the fast reply vlad01...... sadly the vr is auto so guess the 2bar memcal ive got is no use damn it.

many thanks mate for your experience

Damo
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: vn/vp memcal

Post by vlad01 »

The 808, 082 and 305 are essentially all the same ECU with minor updates, the VR auto is a completely different beast and not compatible.

However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
damo702002
Posts: 14
Joined: Fri Dec 02, 2016 3:16 pm

Re: vn/vp memcal

Post by damo702002 »

vlad01 wrote:The 808, 082 and 305 are essentially all the same ECU with minor updates, the VR auto is a completely different beast and not compatible.

However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.

You might be able to do that buddy but I,m an old dinosaur that wouldn't know where to start.....hence the dummy first question hahaha.
but appreciate your input greatly buddy
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vn/vp memcal

Post by Holden202T »

yeah get the ve table, spark tables and afr tables from the vn/vp tune and convert them over to the $11P code.... oh and injector rate if its been changed.
damo702002
Posts: 14
Joined: Fri Dec 02, 2016 3:16 pm

Re: vn/vp memcal

Post by damo702002 »

Holden202T wrote:yeah get the ve table, spark tables and afr tables from the vn/vp tune and convert them over to the $11P code.... oh and injector rate if its been changed.

Yeah way outta my range of skills there mate!!!

But appreciate your input.

Cheers
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vn/vp memcal

Post by Holden202T »

no better way to learn than to get on here and read up and have a go :)
damo702002
Posts: 14
Joined: Fri Dec 02, 2016 3:16 pm

Re: vn/vp memcal

Post by damo702002 »

Holden202T wrote:no better way to learn than to get on here and read up and have a go :)

Anything computer just isnt my strong suit mate that's all....tried reading up on it all but it's real confusing to me buddy
Humptydumpty
Posts: 58
Joined: Fri May 10, 2019 12:11 pm
cars: Toyota Bundera, Sr Hilux, Hilux workmate.
Location: Sydney

Re: vn/vp memcal

Post by Humptydumpty »

Hi all,
Been reading up on Memcal re tunes (kinda out of my league but interesting)

I’ve been quoted $160 to have my VR memcal re tuned/programmed by what looks like a fairly reputable shop - what do you guys think? He said this “
I can dyno or road tune . If its stock then we use this tune . Its been done already on the dyno and road and tested numerous times on the dyno. Approx power is 150-155rwkw. This is the most you will get unopened.“

Or can somebody download a tune easily?
Cheeers
Post Reply