89 454 tbi on 440

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Post Reply
cwkerr007
Posts: 2
Joined: Tue Dec 24, 2019 5:47 am
cars: 78 3/4 chevy 5.3 88 dodge dakota 440 gm tbi yamaha vmax 97

89 454 tbi on 440

Post by cwkerr007 »

i'm a newbi so forgive the writingto make it short i have a 78 440 motor stock that i have put the harness off a 91 chevy truck 747 ecu with the tb off of a 89 454(yes I swapped the tps wires) and wired the ign mod into the dodge dist i am looking for the best way to tune the system ??? It is going in 1988 dakota with 3.9 tbi and i have put 3.73 gear 3"exh it will have the 727 tq flite trans please help :?: :?:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 89 454 tbi on 440

Post by delcowizzid »

Gearheadefi is probably a better page for 747 ecu they have all the files for tunerpro etc and lots of people that have used that ecu
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
cwkerr007
Posts: 2
Joined: Tue Dec 24, 2019 5:47 am
cars: 78 3/4 chevy 5.3 88 dodge dakota 440 gm tbi yamaha vmax 97

Re: 89 454 tbi on 440

Post by cwkerr007 »

i have been there and that is where i learned how to ad the ign to it. thanx they are great over there i guess what i am really looking for is a system that i can use the gm tb and tune with my laptop. i know thats probably asking to much
Post Reply