Reading my bin

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
User avatar
j_ds_au
Posts: 384
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: Reading my bin

Post by j_ds_au »

antus wrote:... 2 is a confused and useless mix of 2 & 4 together (doesnt matter for your purpose).
I presume this is describing KalMaker, because on a stock VS O/S, a read of area 2 is purely 2 (except for the last byte).

Joe.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Reading my bin

Post by antus »

this is describing 128kb bins, but this is 64kb? so yes as you say, just the last 2 bytes. I came in to this a bit late, and should have read the whole thread.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
j_ds_au
Posts: 384
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: Reading my bin

Post by j_ds_au »

antus wrote:this is describing 128kb bins, but this is 64kb? so yes as you say, just the last 2 bytes. I came in to this a bit late, and should have read the whole thread.
Hmmm ... to be clear, reading the first 64K of a 128K stock VS O/S works fine except for the last byte, it doesn't get you mixed data from both banks of the memcal. But perhaps for KalMaker you do get mixed data, that I don't know.

Joe.
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: Reading my bin

Post by vs ss »

.
Last edited by vs ss on Fri Aug 27, 2021 2:34 pm, edited 1 time in total.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Reading my bin

Post by antus »

Wow you do learn something every day, something must have changed how the ALDL is called in the VT PCMS.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: Reading my bin

Post by vs ss »

.
Last edited by vs ss on Fri Aug 27, 2021 2:35 pm, edited 1 time in total.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Reading my bin

Post by delcowizzid »

Buy a Tl866 II programmer and read the tune out you'll need it to swap to other code anyway
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: Reading my bin

Post by vs ss »

.
Last edited by vs ss on Fri Aug 27, 2021 2:36 pm, edited 1 time in total.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Reading my bin

Post by antus »

The sizes sound right. Most the data is the OS. The cal is a lot smaller. Post up the 64kb file and we can probably tell you what the last 2 bytes should be and fix it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: Reading my bin

Post by vs ss »

.
Last edited by vs ss on Fri Aug 27, 2021 2:36 pm, edited 1 time in total.
Post Reply