Need someone to desolder eeprom, program it and reinstall

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Post Reply
DethRattles
Posts: 174
Joined: Wed Apr 05, 2023 11:38 am
cars: 2004 Grand am gt

Need someone to desolder eeprom, program it and reinstall

Post by DethRattles »

My old bcm had to be replaced,,,i got a replacement bcm and pcm from a junkyard that said it was a gt...it's an se model. So in order for my bcm to work with my old bcm is if the vin is programmed into it. It cant be clipped, anyone know of anyone in michigan or close to it?
04colyZQ8
Posts: 380
Joined: Thu Jan 16, 2014 12:41 pm
cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion

Re: Need someone to desolder eeprom, program it and reinstal

Post by 04colyZQ8 »

I’m near Windsor which is bordering Michigan. What is the eeprom part number? Why won’t a chip clip work? I use them on most gm bcms.
Post Reply