Ve map based tune needed

[adam00776543]

i am wanting to fit dual throttle bodies on top of my ecotech (VS) engine and because of this I will need to eliminate the MAF sensor and will be needing a mafless (MAP based) tune, My engine is internally stock so if anyone is able to help me out with a VE (map) based tune for my VS ecu that will allow me to retain the functionality of my 4l60e gearbox that would be great or point me in the direction I should be going to get this up and running..

[v8-tuning]

The only code that can do maffless is kalmaker at this stage.
Or you can go back to the 424 ecu from the vr model.
That's the only way to do it currently.

[adam00776543]

Thanks,
would a VR ECU plug straight into my holden VS or will i have to muck areound with the wiring?
are all of the plugs to vr ecu the same as vs ecu?

[adam00776543]

Does the vs box run the same electronic controls in the gearbox as vr? as if i will be putting a vr chip in i will be needing the same gearbox controlls running for my gearbox

[vs ss]

No it won't be a straight swap you will need to repin the harness.
The vr pcm will run the vs auto fine.

[VX L67 Getrag]

Um the $11p code is out & will work perfectly but still need to use vr style PCM & re-pin but there's a good document in the released version that I made when I converted a vs to $11p.