Howdy,
Can anyone here help me out with a tune for the later VT injectors in a VN2.
The engine itself is completely stock with only a set of Pacemaker Extractors and 2.5" exhaust.
Note that the fuel rail is the standard VN2 so the regulator will only be providing 3.0 instead of the later VT with the 3.5.
Very much appreciated, thanks in advance.
Greg
Tune for VN V6 with VT injectors
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Tune for VN V6 with VT injectors
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: Tune for VN V6 with VT injectors
I've done it before there's a thread on here sith a person whe delcoed a jeep.
I just opened a vt tune and copied over the add on times and opening times into a 12P tune.
Have a try see how you go. Put up some screen shots when you find the tables.
I just opened a vt tune and copied over the add on times and opening times into a 12P tune.
Have a try see how you go. Put up some screen shots when you find the tables.
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Tune for VN V6 with VT injectors
you can use my latest tune here, modify the injector parameters to suit the 777s and you have an excellent performance tune to suit your setup.
http://pcmhacking.net/forums/viewtopic. ... 339#p56339
http://pcmhacking.net/forums/viewtopic. ... 339#p56339
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Tune for VN V6 with VT injectors
Dylan wrote:I've done it before there's a thread on here sith a person whe delcoed a jeep.
I just opened a vt tune and copied over the add on times and opening times into a 12P tune.
Have a try see how you go. Put up some screen shots when you find the tables.
mind you the 808 and later VS onward ECU have a difference of 0.5ms. One of them has a built in offset that is at hardware level iirc.
I think it was the 808 and similar family? The1 told me of this, so maybe PM him and he should have the correct data for those to suit 808 family of ECUs
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Tune for VN V6 with VT injectors
the VS-VY PCM's have a internal code offset 0.5ms, i do have it on my list to do some testing with this to remove it.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: Tune for VN V6 with VT injectors
awesome you guys are superb.
i'll give that a go, that gives me an awesome start - thanks so very much
need to see about it getting it onto a memcal next. i am a bit fuzzy on that bit.
i'll give that a go, that gives me an awesome start - thanks so very much
need to see about it getting it onto a memcal next. i am a bit fuzzy on that bit.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.