vn v6 2 bar tune

Want a chip to suit your application? Ask here. Include as much detail in your request as possible.
Posts: 2
Joined: Sun Oct 09, 2016 3:37 pm

vn v6 2 bar tune

Postby cleetus71 » Sun Oct 09, 2016 3:51 pm

hi i am after a memcal with 2 bar tune to suit vn s1 v6 with sc14 supercharger running 8psi it has extractors twin 2 inch exhaust mild port work 65mm throttle body
thankyou
cleetus

User avatar
Posts: 4357
Joined: Mon Jan 04, 2010 10:23 am

Re: vn v6 2 bar tune

Postby The1 » Sun Oct 09, 2016 3:52 pm

if you have a search on here i think there was someone else doing similar, there might be a 12p tune around.

Posts: 2
Joined: Sun Oct 09, 2016 3:37 pm

Re: vn v6 2 bar tune

Postby cleetus71 » Sun Oct 09, 2016 6:34 pm

thanks will have a look

User avatar
Posts: 10054
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: vn v6 2 bar tune

Postby Holden202T » Mon Oct 10, 2016 10:36 am

this is one I did for a mates S1 VN with SC14, it only ever saw 6psi from memory, and the engine was stock, so not sure how close it will be but would probably get you started anyways.

its OSE $12P v1.12 - APNX based.

2015-05-03 - final tune.bin
(32 KiB) Downloaded 174 times

Posts: 5
Joined: Fri Jul 24, 2020 3:17 pm

Re: vn v6 2 bar tune

Postby Maccatheclown » Wed Aug 26, 2020 2:33 am

Holden202T wrote:this is one I did for a mates S1 VN with SC14, it only ever saw 6psi from memory, and the engine way stock, so not sure how close it will be but would probably get you started anyways.

its OSE $12P v1.12 - APNX based.

2015-05-03 - final tune.bin



sorry for the dig up of an old thread, just wondering if i could borrow this tune for my covid project? I'm pretty clueless when it comes to this so correct me if i am wrong i could essentially burn this bin to a eprom and away i go...? cheers

Site Admin
User avatar
Posts: 6455
Joined: Sat Feb 28, 2009 8:34 pm

Re: vn v6 2 bar tune

Postby antus » Mon Aug 31, 2020 7:17 pm

Yes, thats right, just make sure the chip is the right size, or if its larger that it ends in the right address (not starts). It looks like this one is 12P v112 which is the current version still, so editable and loggable with the current 12P package. Also check the MAP sensor flags are set up to match the sensor type (2 or 3 bar) that you are running.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Return to Wanted

Who is online

Users browsing this forum: No registered users and 1 guest