vn v6 2 bar tune

Want a chip to suit your application? Ask here. Include as much detail in your request as possible.
Post Reply
cleetus71
Posts: 2
Joined: Sun Oct 09, 2016 3:37 pm
cars: 2wd 1981 hilux with vn s1 v6 supra 5 speed

vn v6 2 bar tune

Post by cleetus71 »

hi i am after a memcal with 2 bar tune to suit vn s1 v6 with sc14 supercharger running 8psi it has extractors twin 2 inch exhaust mild port work 65mm throttle body
thankyou
cleetus
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: vn v6 2 bar tune

Post by The1 »

if you have a search on here i think there was someone else doing similar, there might be a 12p tune around.
cleetus71
Posts: 2
Joined: Sun Oct 09, 2016 3:37 pm
cars: 2wd 1981 hilux with vn s1 v6 supra 5 speed

Re: vn v6 2 bar tune

Post by cleetus71 »

thanks will have a look
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vn v6 2 bar tune

Post by Holden202T »

this is one I did for a mates S1 VN with SC14, it only ever saw 6psi from memory, and the engine was stock, so not sure how close it will be but would probably get you started anyways.

its OSE $12P v1.12 - APNX based.
2015-05-03 - final tune.bin
(32 KiB) Downloaded 392 times
Maccatheclown
Posts: 5
Joined: Fri Jul 24, 2020 3:17 pm
cars: Vn HSV+6 build #93 auto
Vp v6 t5 converted
Vr v6 t5 factory
Vs statesman v8 getrag converted
Wk l67, awaiting getrag conversion

Re: vn v6 2 bar tune

Post by Maccatheclown »

Holden202T wrote:this is one I did for a mates S1 VN with SC14, it only ever saw 6psi from memory, and the engine way stock, so not sure how close it will be but would probably get you started anyways.

its OSE $12P v1.12 - APNX based.
2015-05-03 - final tune.bin

sorry for the dig up of an old thread, just wondering if i could borrow this tune for my covid project? I'm pretty clueless when it comes to this so correct me if i am wrong i could essentially burn this bin to a eprom and away i go...? cheers
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: vn v6 2 bar tune

Post by antus »

Yes, thats right, just make sure the chip is the right size, or if its larger that it ends in the right address (not starts). It looks like this one is 12P v112 which is the current version still, so editable and loggable with the current 12P package. Also check the MAP sensor flags are set up to match the sensor type (2 or 3 bar) that you are running.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
tomz
Posts: 13
Joined: Thu Apr 22, 2021 10:48 pm

Re: vn v6 2 bar tune

Post by tomz »

Is it possible to run this tune without a 02 sensor?
or more correctly will it run without?
I am adding a M90 supercharger to a VN v6 in a boat and have no provisions to add a 02 sensor due to wet exhausts.
Thinking this tune would suit the application perfectly....but id really be keen to hear some expert opinions
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vn v6 2 bar tune

Post by Holden202T »

theres no issue with having no o2 sensor installed, you can just turn off any error codes that come up from not having it.

that said i would highly recommend some form of a dyno tune etc to ensure that the tune is actually right, as you could quite easily torch the motor if its not.
tomz
Posts: 13
Joined: Thu Apr 22, 2021 10:48 pm

Re: vn v6 2 bar tune

Post by tomz »

Thanks gents really appreciate the feedback.
The plan is to run very conservative boost levels, timing and fueling.
I will look at a sneaky way to get an 02 sensor in their as I agree with what's been said as I now feel the extra work and modifications to get it in may well be worth it.
Post Reply