VS Auto to Manual PCM Hardware Conversion
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VS Auto to Manual PCM Hardware Conversion
The computer looks good. I dont know about the sine signal though... will need someone else to answer that.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VS Auto to Manual PCM Hardware Conversion
The mods allow for stock t5 vss to be read when it's connected to the right pin of the pcm its a different pin than the auto speed sensor
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VS Auto to Manual PCM Hardware Conversion
Cool, thanks for the replies guys. Sorry I'm late back to you. But, it now sounds like to me that all I need is the memcal tune, not the pcm mod. Would someone in this thread be able to do it? I don't really feel the need to get all the equipment and learn for just the one tune. Thanks again, V
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VS Auto to Manual PCM Hardware Conversion
I can probably help you out send me a message
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VS Auto to Manual PCM Hardware Conversion
That would be great, but I'm on the wrong side of the water. If possible, I'm hoping to find someone in Australia to give me a hand, to save a little on time and postage costs. I appreciate the offer, I may still take you up on it.
Thanks, V
Thanks, V