Genuine GMH Dealer Workshop Manual For VS
- littlesprout
- Posts: 25
- Joined: Thu May 31, 2018 8:01 pm
Genuine GMH Dealer Workshop Manual For VS
HI, Trying to get my hands on a genuine GMH dealer workshop manual for a VS.
Not a Gregory or Haynes but a genuine GMH workshop manual used at their dealerships.
If anyone has one or knows where I could find one please let me know.
Not a Gregory or Haynes but a genuine GMH workshop manual used at their dealerships.
If anyone has one or knows where I could find one please let me know.
-
- Posts: 288
- Joined: Wed Jul 01, 2009 7:18 pm
- cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.
Re: Genuine GMH Dealer Workshop Manual For VS
I got mine through ebay.
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: Genuine GMH Dealer Workshop Manual For VS
Hello Littlesprout,
What are you actually after as i have the original manual that was on the old xp systems they used. full database lookup etc. I am sure I can assist you with what you are looking for.
Cheers
oldn64
What are you actually after as i have the original manual that was on the old xp systems they used. full database lookup etc. I am sure I can assist you with what you are looking for.
Cheers
oldn64
- littlesprout
- Posts: 25
- Joined: Thu May 31, 2018 8:01 pm
Re: Genuine GMH Dealer Workshop Manual For VS
oldn64 that is exactly what I'm trying to get my hands on!
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: Genuine GMH Dealer Workshop Manual For VS
You dont want to know how I got this........
I cannot just give it away either. but I do have it running on a VM....
What part are you after I will see what I can do. I have it only to support the old forums i was part of with a mates Statesman. He had a VS Series 3 and I had a VQ series 2. Came in handy a lot actually. even down to part numbers. So wish I could get this for my VE SS. The crappy pdf copy I have for it while is great resource is a pain to navigate.
cheers
oldn64
I cannot just give it away either. but I do have it running on a VM....
What part are you after I will see what I can do. I have it only to support the old forums i was part of with a mates Statesman. He had a VS Series 3 and I had a VQ series 2. Came in handy a lot actually. even down to part numbers. So wish I could get this for my VE SS. The crappy pdf copy I have for it while is great resource is a pain to navigate.
cheers
oldn64
Re: Genuine GMH Dealer Workshop Manual For VS
there's 2 books you want
ISBN 0868361305 VR Service Manual Volume 1
Which has all the body etc
ISBN 0868361771 VS Series Service Manual Supplement Volume 1
Which has the rest of the changes to VS engine/trans etc over the VR series.
Both books you used to be able to publicly purchase at the https://www.computeroutpost.com.au/ but they seem no longer available, there's a few floating around from time to time on ebay.
Alternatively you can get the Holden Workshop manual CD which only works on windows XP from memory, i have it here, contains the same stuff, you used to be able to purchase it over the counter from the holden parts counter back in the day.
ISBN 0868361305 VR Service Manual Volume 1
Which has all the body etc
ISBN 0868361771 VS Series Service Manual Supplement Volume 1
Which has the rest of the changes to VS engine/trans etc over the VR series.
Both books you used to be able to publicly purchase at the https://www.computeroutpost.com.au/ but they seem no longer available, there's a few floating around from time to time on ebay.
Alternatively you can get the Holden Workshop manual CD which only works on windows XP from memory, i have it here, contains the same stuff, you used to be able to purchase it over the counter from the holden parts counter back in the day.
- littlesprout
- Posts: 25
- Joined: Thu May 31, 2018 8:01 pm
Re: Genuine GMH Dealer Workshop Manual For VS
Hi the1 thanks for the info.
I'd happily go anywhere to buy the CD but it seems impossible to find.
If you or anyone else wants to sell a copy please let me know.
Cheers
I'd happily go anywhere to buy the CD but it seems impossible to find.
If you or anyone else wants to sell a copy please let me know.
Cheers
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: Genuine GMH Dealer Workshop Manual For VS
The1 wrote:there's 2 books you want
ISBN 0868361305 VR Service Manual Volume 1
Which has all the body etc
ISBN 0868361771 VS Series Service Manual Supplement Volume 1
Which has the rest of the changes to VS engine/trans etc over the VR series.
Both books you used to be able to publicly purchase at the https://www.computeroutpost.com.au/ but they seem no longer available, there's a few floating around from time to time on ebay.
Alternatively you can get the Holden Workshop manual CD which only works on windows XP from memory, i have it here, contains the same stuff, you used to be able to purchase it over the counter from the holden parts counter back in the day.
How the hell did you get your hands on a copy. My copy was dealer supplied and was locked to the HDD guid from memory, almost impossible to copy......
You are right it only runs on XP.
Cheers
oldn64
Re: Genuine GMH Dealer Workshop Manual For VS
they used to be sitting on the dealer parts counter for sale. They never had the books but you could buy any of them through that website. So as far as i was aware it's open to public.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Genuine GMH Dealer Workshop Manual For VS
I think you guys are talking about different things. I know there was something they called epc or partfinder or microcat which was windows 16 bit, then windows 32 bit then replaced by tis2000 and then turned in to tis2web (and was then opened to the public by subscription). The partfinder was locked to the dealer pc, and so was tis2000 by dongle but eventually tis2web was opened up for access by subscription.
This is just talking about the workshop manuals which were available for dealerships and workshops to buy from the start.
This is just talking about the workshop manuals which were available for dealerships and workshops to buy from the start.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396