vr 355 bin files

nig087 · Post by **nig087** » Wed Jan 12, 2011 11:44 am

hi all i need are 355 stroker bin for my 94 vr manual also i have are 29c256 chip are these ok for vr v8 ecu

TTVN · Post by **TTVN** » Wed Jan 12, 2011 4:59 pm

yeah that chip is fine

i have a bin off my landcruiser but u might have to tweak the top end a little as its on lpg too and has a mixer on it restricting flow a little

nig087 · Post by **nig087** » Wed Jan 12, 2011 5:23 pm

ok mate can you post the bin on there

TTVN · Post by **TTVN** » Thu Jan 13, 2011 2:45 pm

355
9.5:1
228 cam
blue tops
twin 2.5"

will need trimming a bit but will run fine

nig087 · Post by **nig087** » Thu Jan 13, 2011 6:07 pm

could you mod this bin to suit my 94 vr man 355 10.5.1 starr90mm craneH304 bluetops 345diff

nig087 · Post by **nig087** » Thu Jan 13, 2011 6:49 pm

how do i change the bin to suit craneH304 and starr90mm intake

Post by **VL400** » Thu Jan 13, 2011 8:09 pm

There is no magic formula or tick box option for a different cam and intake. You will either need to pay someone to tune it or get your self a wideband and start tuning it yourself (the getting stared guide has info one what hardware you will need to make changes to the memcal). Will prob need some fuel taken out in the low RPM areas, but until you find where its idling by logging some data its going to be hit and miss. TTVN has given you a very good starting point though.

nig087 · Post by **nig087** » Fri Jan 14, 2011 6:59 pm

theres the bin file which was in my 94 vr v8 355 manual ute it runs rich and won't idle could some one have are look at it and see what the problems are if need engine specs just let me know thanks

TTVN · Post by **TTVN** » Fri Jan 14, 2011 7:16 pm

you should post eng specs if u want ppl to help out mate

dont think anyone on here can psychic tune "yet" lol

Post by **delcowizzid** » Fri Jan 14, 2011 7:25 pm

535rpm desired idle in drive LOL and 750 in park its never going to idle nicely like that

vr 355 bin files

vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files