vr 355 bin files

nig087 · Post by **nig087** » Fri Jan 14, 2011 7:52 pm

94 vr manual engine specs are 355ci 10.5.1 craneH304 bluetops starr90mm 3'exhaust

TTVN · Post by **TTVN** » Sat Jan 15, 2011 6:32 pm

nig087 · Post by **nig087** » Sat Jan 15, 2011 8:23 pm

i put the tune in but it runs the same rich and won't idle the best i can get the idle at is 1500 any less it drops off and i need the fans set to 95c as i have electric fans

nig087 · Post by **nig087** » Sat Jan 15, 2011 8:36 pm

theres are tune i found i put this one in it idles and doesn't run rich but theres no topend and engine light and fans are on

TTVN · Post by **TTVN** » Sat Jan 15, 2011 8:58 pm

if eng light and fans on it was a bad tune or bad burn its running full limp mode

pull ve down low out of the tune i posted and add idle spark and some low rpm spark

dont touch injector size as the ve table is maxxed out at pk tq

what are you tuning with ????

vl400 setup or ostrich or burning eprom/eeproms

nig087 · Post by **nig087** » Sat Jan 15, 2011 9:07 pm

tunerpro rt and burn2 burner could you adjust it and set fans to 95c and post bin back up

TTVN · Post by **TTVN** » Sat Jan 15, 2011 9:11 pm

TTVN · Post by **TTVN** » Sat Jan 15, 2011 9:17 pm

here is a link to the file package use it in tunerpro to adjust if you need to

https://pcmhacking.net/forums/download ... hp?id=1722

nig087 · Post by **nig087** » Sat Jan 15, 2011 9:47 pm

put tune in got it to idle at 1000 but still rich stine eyes and when fans come on idle drops off engine stalls

Post by **delcowizzid** » Sat Jan 15, 2011 9:52 pm

stings your eyes is lean many people make that mistake thinking its richness

vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files

Re: vr 355 bin files