vr 355 bin files
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: vr 355 bin files
Good stuff The AFR should really be left to the target you are wanting and the VE table adjusted to get the fuel mixture correct, a little bit of math can work out what the VE needs to be adjusted to - (Orig AFR/what you have now) * VE cell that matches the AFR you adjusted.
Re: vr 355 bin files
anyone have are vn-vs v8 manual 355 stroker bin file
Re: vr 355 bin files
theres some in here:https://pcmhacking.net/forums/viewtopic.php?f=7&t=3 ...
Re: vr 355 bin files
worked 355 bins dyno tested
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vr 355 bin files
if you cant get it to run on TTVN's tunes you have issues hes tuned enough 355 and 383 engines in his time both N/A and TURBO to at least get it pretty close
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vr 355 bin files
i really think you need to start logging some info to see what its doing, you could give tunes sent back and forth till the cows come home, but without decent logs showing what the engine is doing its shooting in the dark and just wasting alot of time!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: vr 355 bin files
got it running good for now need to sort are data logger
Re: vr 355 bin files
in after are stock 220kw stroker bin for 94 vr manual to work with the OSE_12PV110 XDF
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: vr 355 bin files
Dont know of anyone porting that over to 12P so will have to make one from a stock bin here .. https://pcmhacking.net/forums/viewtopic.php?f=7&t=3 and XDF here .. https://pcmhacking.net/forums/viewtopic.php?f=7&t=5
Its not hard just takes time, when you have made one be sure to post it up to help others
Its not hard just takes time, when you have made one be sure to post it up to help others
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vr 355 bin files
the only way your going to get what you need is to get a standard tune and adjust it to suit your own engine!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread