VZ ABS Module Programming Issue

For non EFI mechanical discussion
Posts: 6
Joined: Thu Sep 23, 2021 10:12 am

VZ ABS Module Programming Issue

Postby OldSkoolGP » Tue May 10, 2022 12:13 pm

Hopefully this is the right section for this question.

With the successful conversion of my GTO to run on an E38 computer, the only thing that remains for me to fix is to get my ABS/TC module working with the E38 properly. The solution seems simple but I've been unable to accomplish it as of yet. I made a brief video demonstrating the problem, and I'm hoping someone on here will know the solution.


Posts: 118
Joined: Fri Feb 24, 2017 11:27 am

Re: VZ ABS Module Programming Issue

Postby gmtech825 » Tue May 10, 2022 9:42 pm

have you tried it on the bench?

also, that high voltage DTC may be the problem. It wouldn't surprise me if it won't allow programming with voltage DTC's set.

Posts: 428
Joined: Thu Feb 13, 2020 11:32 pm

Re: VZ ABS Module Programming Issue

Postby ironduke » Tue May 10, 2022 9:55 pm

The only suggestion that comes to mind(after trying gmtech825's suggestions) as I have never seen this or done this exact scenario is to see if you can find an actual tech2 as I have had issues with some of the older functions with saab before where tech2win would fail but an actual tech2 would work. Programming fobs,keys,etc.. buttons would kick back a fail instantly with tech2win, with a tech2 it would actually do something.

Posts: 6
Joined: Thu Sep 23, 2021 10:12 am

Re: VZ ABS Module Programming Issue

Postby OldSkoolGP » Wed May 11, 2022 11:19 am

The only suggestion that comes to mind(after trying gmtech825's suggestions) as I have never seen this or done this exact scenario is to see if you can find an actual tech2 as I have had issues with some of the older functions with saab before where tech2win would fail but an actual tech2 would work. Programming fobs,keys,etc.. buttons would kick back a fail instantly with tech2win, with a tech2 it would actually do something.

I have a friend with one and I need to convince him to try this on a spare module for me.

also, that high voltage DTC may be the problem. It wouldn't surprise me if it won't allow programming with voltage DTC's set.

That was an historic code on that particular module. My original module does not have that code but returns the same result.

User avatar
Posts: 2898
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: VZ ABS Module Programming Issue

Postby Tazzi » Wed May 11, 2022 1:21 pm

OldSkoolGP wrote:Hopefully this is the right section for this question.

With the successful conversion of my GTO to run on an E38 computer, the only thing that remains for me to fix is to get my ABS/TC module working with the E38 properly. The solution seems simple but I've been unable to accomplish it as of yet. I made a brief video demonstrating the problem, and I'm hoping someone on here will know the solution.


If you don't change any settings and click program, does it succeed?
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

Posts: 6
Joined: Thu Sep 23, 2021 10:12 am

Re: VZ ABS Module Programming Issue

Postby OldSkoolGP » Fri May 13, 2022 1:18 pm

Didn't try that yet.

Return to Engine/Transmision Mechanical

Who is online

Users browsing this forum: No registered users and 2 guests