LS TB on L67/ecotec

For non EFI mechanical discussion
immortality
Posts: 3410
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

LS TB on L67/ecotec

Post by immortality »

Hi guys,

What are people doing for the vacuum sources for things like the purge solenoid and charcoal canister as the LS TB doesn't have the vacuum ports on the side like the V6 TB does?
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: LS TB on L67/ecotec

Post by vs ss »

The purge solenoid comes from the charcoal canister above the diff, so there should only be one vacuum hose. I’ve seen them put brass fittings straight into the elbow,but on my old car I drilled through the side of the adapter plate that I made and fitted a press fitting in there like the factory one in the tb.
0081
Posts: 186
Joined: Fri Jul 09, 2010 10:01 pm
cars: VY s L67
Haines Hunter - not a car but still a toy

Re: LS TB on L67/ecotec

Post by 0081 »

What ubend are you using and if its the stock one what adaptor plate are you going to run.

I made my own adaptor for the stock ls1 throttle body and drilled the adaptor for one fitting and cut out a section of the plate so the fitting on the throttle body worked
immortality
Posts: 3410
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: LS TB on L67/ecotec

Post by immortality »

This LS TB is on a mates VS L67 using the MACE adaptor plate.
0081
Posts: 186
Joined: Fri Jul 09, 2010 10:01 pm
cars: VY s L67
Haines Hunter - not a car but still a toy

Re: LS TB on L67/ecotec

Post by 0081 »

They mill out the adaptor so thats sorted you just need one vac line.
You may be able to drill one i to the side of the adaptor?
vp304
Posts: 451
Joined: Wed May 19, 2010 2:21 pm

Re: LS TB on L67/ecotec

Post by vp304 »

Bump on this 4 year old post.
But looking at doing ls1 throttle body onto my l67.
Do i just use the sensors that are on the ls1 throttle body
Tps and iac
Or do i fit the l67 ones to the ls1 throttle body ?
VX L67 Getrag
Posts: 2873
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: LS TB on L67/ecotec

Post by VX L67 Getrag »

Have to use the LS 1's as they're both completely different & wont swap, but just plug & play from memory & then tune to suit!
vp304
Posts: 451
Joined: Wed May 19, 2010 2:21 pm

Re: LS TB on L67/ecotec

Post by vp304 »

Vxl67 getrag thanks for the info
vp304
Posts: 451
Joined: Wed May 19, 2010 2:21 pm

Re: LS TB on L67/ecotec

Post by vp304 »

vx l67 getrag doing this swap at the moment the l67 iac and tps wiring plugs straight into ls1 tb sensors, but do you remember if there is any settings i have to change in tuner pro etc.
As i know some tps iacs are different etc
User avatar
vlad01
Posts: 7772
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: LS TB on L67/ecotec

Post by vlad01 »

You can quickly check the TPS by watching it in TP while you sweep it through it's range. IAC I am not sure but I have heard even with the V6s there were different IAC pintle angles which effect the air response vs the steps so there probably is some setting for that but I don't have any experience with IAC settings.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply