4L60E Complete Rebuild
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 4L60E Complete Rebuild
The importer is trying to make me one of the Vic distributors. ain't nobody got time for dat.
I still haven't used my can yet, and I use it everywhere.
I still haven't used my can yet, and I use it everywhere.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: 4L60E Complete Rebuild
what size did you get? they only have aerosol can 430ml and 1ltr in stock.
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 4L60E Complete Rebuild
430 can
all my engine still looks like new since I used it even over the wet condensation of winter. The front engine cover is white and fluffy from corrosion coz I didn't put it on that part as I have a new timing cover I got from GM in the US.
The top of the manifold where the 3800 script is is polished and wiped once with the gibbs and is as I first polished it some months back.
all my engine still looks like new since I used it even over the wet condensation of winter. The front engine cover is white and fluffy from corrosion coz I didn't put it on that part as I have a new timing cover I got from GM in the US.
The top of the manifold where the 3800 script is is polished and wiped once with the gibbs and is as I first polished it some months back.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: 4L60E Complete Rebuild
well trans is now in, i can report it all works awesome, 1st can't hold traction now off the mark Have to finish the OP sometime now.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: 4L60E Complete Rebuild
Well done Bet that first drive was good after all the work went in to it.
Re: 4L60E Complete Rebuild
yeh big grin cause it all worked!!
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 4L60E Complete Rebuild
hey you guys wouldn't happen to know if a latter VR auto V8 trans will work with older wiring harness?
I am changing the engine and box in my brother's 96 VR 5L ute and was assured by many "experts" it takes the later 13 pin trans, so thats what we got for it. Turns out its got 12 pins on the dead box.
So will it work? 13 pin going into 12 pin car? the plug physically fits.
I am changing the engine and box in my brother's 96 VR 5L ute and was assured by many "experts" it takes the later 13 pin trans, so thats what we got for it. Turns out its got 12 pins on the dead box.
So will it work? 13 pin going into 12 pin car? the plug physically fits.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: 4L60E Complete Rebuild
i think the extra on the latter was pwm lockup solenoid?
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 4L60E Complete Rebuild
is it needed you think?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 4L60E Complete Rebuild
you can use either one .just when using old box with newer tune throws a code for pwm
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem