253 V8 carby selection
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
I'll take it to super balance they do this type of work. I have a Soarer auto tailshaft some where also. I changed the the bushing today is that in far enough?
Got engine bay done also
Before pictures after
had big plans of getting the gearbox on today but the thrust bearing they sent with clutch kit won't fit it's to small! Got engine bay done also
Before pictures after
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:21 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
From the ad for the clutch kit https://www.ebay.com.au/itm/360101787646 the thrust bearing should fit my gearbox hey? The hole in the bearing is to small.
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:21 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
ah ha they mention in red!
"important please note :
Thrust bearing supplied in this kit is an early Holden type
GSB-222 As pictured"
wrong one!
"important please note :
Thrust bearing supplied in this kit is an early Holden type
GSB-222 As pictured"
wrong one!
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
I'm confused which thrust bearing will suit Delow fork and gearbox
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:22 am, edited 2 times in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
I guess Dellow would have one since all of the conversion kit is from them
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:22 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
I stumbled across the one you mentioned on eBay it would have to be the right one for sure? it's expensive . With the thrust bearing and Dellow fork is there a clip to attach it? like there was on the fork and thrust bearing off the supra below.