253 V8 carby selection
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:19 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
I have 80W-90 grade oil (API GL-4) and have soaked the bearing before I put it in. I will measure the distance again the original one was flush with crank mine is out about 1mm. When filling the gearbox is it ok the flip it upside down to refill? is oil going to pour out any where?
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:19 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
I guess the fill plug is on top of the gearbox? opps the bearing it should be 6.4mm out?
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:19 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
Can you see the bearing when the clutch and box are on? I have a small inspection camera.
Going to sort out tail shaft once engine is in so get measurements right
Going to sort out tail shaft once engine is in so get measurements right
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:20 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
No worries will do that now. Pop bearing out to 6.4mm and bolt it up, I'll be back with some photo's
Re: 253 V8 carby selection
.
Last edited by 'quipt4it on Sat Aug 28, 2021 1:20 am, edited 1 time in total.
- Madmatt2006
- Posts: 369
- Joined: Fri Aug 31, 2018 2:48 pm
- cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT - Location: Katandra West
- Contact:
Re: 253 V8 carby selection
it's ok, I will easier than trying to move that bearing!!