160S - my enhanced/RT bin for Alfa Romeo 75/164 TS

Bosch Motronic etc ECUs and PCMs
User avatar
Posts: 1007
Joined: Sat Apr 30, 2011 6:27 pm
Location: Narellan, NSW

160S - my enhanced/RT bin for Alfa Romeo 75/164 TS

Postby festy » Tue Jul 16, 2013 5:07 pm

I've been working on this for a while now, it's a custom bin for an Alfa Romeo 75 or 164 2.0 Twinspark (Motronic ML4.1, ECU 0.261.200.108).
Some of the new features added are:
* Real-time (requires RT NVRAM board)
* Improved datalogging with custom message packet
* Extended resolution WOT ignition map
* Ignition knock control
* Tacho tell-tale (requires RT)
* MAF mode (in place of AFM/VAF)
* MAF self-learn (requires RT)
Attachments
160S.zip
(1.6 MiB) Downloaded 138 times

User avatar
Posts: 8983
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 160S - my enhanced/RT bin for Alfa Romeo 75/164 TS

Postby Holden202T » Tue Jul 16, 2013 5:14 pm

I have no use for this but good work man!

User avatar
Posts: 1007
Joined: Sat Apr 30, 2011 6:27 pm
Location: Narellan, NSW

Re: 160S - my enhanced/RT bin for Alfa Romeo 75/164 TS

Postby festy » Tue Jul 16, 2013 6:15 pm

Holden202T wrote:I have no use for this

Me either - one of my GTVs still has the original carbs and points, the other runs 12P :mrgreen:
I started studying the Motronics because there was no real understanding of these ECUs among alfa owners, and certainly no DIY tuning available :o
I've put in somewhere around 1000 hours of R&D into this project so far, that's why I've been a little quiet on this forum since I started on this stuff.

Posts: 1
Joined: Fri Jun 02, 2017 5:12 am

Re: 160S - my enhanced/RT bin for Alfa Romeo 75/164 TS

Postby wred_e » Fri Jun 02, 2017 5:17 am

Hi there!
Got the car, got some chips and just received a programmer. Where do I start if I'd like to learn how to assemble an RT-kit (or buy if there is any left).
Also got to say, amazing work on the Alfas Festy!

Return to Bosch ECUs

Who is online

Users browsing this forum: No registered users and 2 guests