Peugeot motronic bins freshly ripped

Bosch Motronic etc ECUs and PCMs
Posts: 3
Joined: Tue Oct 06, 2015 4:57 am

Peugeot motronic bins freshly ripped

Postby UncleShml » Tue Oct 06, 2015 5:20 am

motronic ml4.1 Peugeot 405 mi16
motronic m5.1 tu5jp 8v -Hey,festy is it similiar with mp3.1?What they revised in this code branch?
Attachments
87c257 mp5.1.BIN
(32 KiB) Downloaded 237 times
m27256 0261200139.BIN
(32 KiB) Downloaded 190 times

User avatar
Posts: 1020
Joined: Sat Apr 30, 2011 6:27 pm
Location: Narellan, NSW

Re: Peugeot motronic bins freshly ripped

Postby festy » Tue Oct 06, 2015 7:29 pm

UncleShml wrote:motronic ml4.1 Peugeot 405 mi16
motronic m5.1 tu5jp 8v -Hey,festy is it similiar with mp3.1?What they revised in this code branch?

Hey, thanks for those :thumbup:
I can't really say what the differences are between the MP3.1 and MP5.1 just yet - I only looked at an MP3.1 bin for the first time today.
Guessing that's from a 0.261.204.052 ECU, ex Peugeot 306 1.6?

Here's a very rough xdf to view the tables, lots of errors in it though.
A few of the tables are pretty easy to work out what they are, it definitely looks pretty similar to the MP3.1 table set except the one I was looking at had what I think are the target lambda tables set to 1.0 everywhere, but your MP5.1 bin actually has realistic values in there...
Attachments
MP51.xdf
(176.57 KiB) Downloaded 221 times

Posts: 3
Joined: Tue Oct 06, 2015 4:57 am

Re: Peugeot motronic bins freshly ripped

Postby UncleShml » Tue Oct 06, 2015 11:43 pm

Hey, some weird one more :thumbup:

festy,thanks :thumbup: checked your xdf file.First 12X12 tables are possible VE! 6A07 6AB3
AFR duplicates - 6856,67AA.
And a lot of limp home values!
In case of sensors failure basicaly it can work only with CAS sensor!
Yes,it is from p 306 tu5jp 8 valves.
So,mp3.1 has dummy afr table(haven't checked - no suitable bins - do you have 0261200213 - 492 bin to check?).
It has similiar structure to earlier m and ml motronic.
And it is transitional stage for later bosch low cost mp.
Very interesting how the pressure to load function is implemented in mp3.1.
Dont say that is similiar to ml and m<1.5 :hmm:
Attachments
mi16 M1.3 0261200354 no lambda moded.bin
(77.03 KiB) Downloaded 203 times

Posts: 3
Joined: Tue Oct 06, 2015 4:57 am

Re: Peugeot motronic bins freshly ripped

Postby UncleShml » Wed Oct 07, 2015 4:38 pm

MP3.1 uses same bosch chip companion 30015 as motronic ml4.1 and m1.3
As mp3.1 uses waste spark mode so it dont't use 30015 16 pin ZDG.
Schematics attached.No motronic mp3.1 ecu at this time.
405 1.9 sri mp3.1 bin added.
Attachments
MP3.1 0261200213-492.bin
(32 KiB) Downloaded 192 times
30015.jpg
30015.jpg (233.16 KiB) Viewed 4506 times

User avatar
Posts: 1020
Joined: Sat Apr 30, 2011 6:27 pm
Location: Narellan, NSW

Re: Peugeot motronic bins freshly ripped

Postby festy » Thu Oct 08, 2015 6:42 am

Do you have the whole schematic for the MP3.1? I'm in the middle of disassembling a bin and trying to work out some of the sensor connections.

Posts: 7
Joined: Wed Sep 30, 2015 6:43 pm

Re: Peugeot motronic bins freshly ripped

Postby FritzP » Sun Jan 31, 2016 6:11 pm

festy wrote:Do you have the whole schematic for the MP3.1? I'm in the middle of disassembling a bin and trying to work out some of the sensor connections.


In the last pages of this document there are some schematic for this ecu.
Document are in French.
Attachments
Bosch-Motronic-MP3.1.pdf
(1.85 MiB) Downloaded 225 times

Site Admin
User avatar
Posts: 5849
Joined: Sat Feb 28, 2009 8:34 pm

Re: Peugeot motronic bins freshly ripped

Postby antus » Fri Feb 05, 2016 7:35 pm

Good information there. Thanks for posting!
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 4
Joined: Mon Sep 04, 2017 9:42 pm

Re: Peugeot motronic bins freshly ripped

Postby Diegogsi » Mon Sep 04, 2017 10:06 pm

Good morning

I have a Peugeot 306s16, with bosch motronic 3.2, anyone have the XDF file of this ECU?

Thanks

Posts: 2
Joined: Fri Nov 16, 2018 9:23 pm
Location: Spain

Re: Peugeot motronic bins freshly ripped

Postby biela » Tue Dec 03, 2019 11:05 pm

Hello

I´d like to disassemble MP3.1 bin. Can anybody upload 8k internal ROM for this ecu?

Thanks

Return to Bosch ECUs

Who is online

Users browsing this forum: No registered users and 1 guest