Peugeot motronic bins freshly ripped
Peugeot motronic bins freshly ripped
motronic ml4.1 Peugeot 405 mi16
motronic m5.1 tu5jp 8v -Hey,festy is it similiar with mp3.1?What they revised in this code branch?
motronic m5.1 tu5jp 8v -Hey,festy is it similiar with mp3.1?What they revised in this code branch?
- Attachments
-
- 87c257 mp5.1.BIN
- (32 KiB) Downloaded 592 times
-
- m27256 0261200139.BIN
- (32 KiB) Downloaded 548 times
Re: Peugeot motronic bins freshly ripped
Hey, thanks for thoseUncleShml wrote:motronic ml4.1 Peugeot 405 mi16
motronic m5.1 tu5jp 8v -Hey,festy is it similiar with mp3.1?What they revised in this code branch?
I can't really say what the differences are between the MP3.1 and MP5.1 just yet - I only looked at an MP3.1 bin for the first time today.
Guessing that's from a 0.261.204.052 ECU, ex Peugeot 306 1.6?
Here's a very rough xdf to view the tables, lots of errors in it though.
A few of the tables are pretty easy to work out what they are, it definitely looks pretty similar to the MP3.1 table set except the one I was looking at had what I think are the target lambda tables set to 1.0 everywhere, but your MP5.1 bin actually has realistic values in there...
- Attachments
-
- MP51.xdf
- (176.57 KiB) Downloaded 611 times
Re: Peugeot motronic bins freshly ripped
Hey, some weird one more
festy,thanks checked your xdf file.First 12X12 tables are possible VE! 6A07 6AB3
AFR duplicates - 6856,67AA.
And a lot of limp home values!
In case of sensors failure basicaly it can work only with CAS sensor!
Yes,it is from p 306 tu5jp 8 valves.
So,mp3.1 has dummy afr table(haven't checked - no suitable bins - do you have 0261200213 - 492 bin to check?).
It has similiar structure to earlier m and ml motronic.
And it is transitional stage for later bosch low cost mp.
Very interesting how the pressure to load function is implemented in mp3.1.
Dont say that is similiar to ml and m<1.5
festy,thanks checked your xdf file.First 12X12 tables are possible VE! 6A07 6AB3
AFR duplicates - 6856,67AA.
And a lot of limp home values!
In case of sensors failure basicaly it can work only with CAS sensor!
Yes,it is from p 306 tu5jp 8 valves.
So,mp3.1 has dummy afr table(haven't checked - no suitable bins - do you have 0261200213 - 492 bin to check?).
It has similiar structure to earlier m and ml motronic.
And it is transitional stage for later bosch low cost mp.
Very interesting how the pressure to load function is implemented in mp3.1.
Dont say that is similiar to ml and m<1.5
- Attachments
-
- mi16 M1.3 0261200354 no lambda moded.bin
- (77.03 KiB) Downloaded 572 times
Re: Peugeot motronic bins freshly ripped
MP3.1 uses same bosch chip companion 30015 as motronic ml4.1 and m1.3
As mp3.1 uses waste spark mode so it dont't use 30015 16 pin ZDG.
Schematics attached.No motronic mp3.1 ecu at this time.
405 1.9 sri mp3.1 bin added.
As mp3.1 uses waste spark mode so it dont't use 30015 16 pin ZDG.
Schematics attached.No motronic mp3.1 ecu at this time.
405 1.9 sri mp3.1 bin added.
- Attachments
-
- MP3.1 0261200213-492.bin
- (32 KiB) Downloaded 522 times
-
- 30015.jpg (233.16 KiB) Viewed 11610 times
Re: Peugeot motronic bins freshly ripped
Do you have the whole schematic for the MP3.1? I'm in the middle of disassembling a bin and trying to work out some of the sensor connections.
Re: Peugeot motronic bins freshly ripped
In the last pages of this document there are some schematic for this ecu.festy wrote:Do you have the whole schematic for the MP3.1? I'm in the middle of disassembling a bin and trying to work out some of the sensor connections.
Document are in French.
- Attachments
-
- Bosch-Motronic-MP3.1.pdf
- (1.85 MiB) Downloaded 624 times
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Peugeot motronic bins freshly ripped
Good information there. Thanks for posting!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Peugeot motronic bins freshly ripped
Good morning
I have a Peugeot 306s16, with bosch motronic 3.2, anyone have the XDF file of this ECU?
Thanks
I have a Peugeot 306s16, with bosch motronic 3.2, anyone have the XDF file of this ECU?
Thanks
Re: Peugeot motronic bins freshly ripped
Hello
I´d like to disassemble MP3.1 bin. Can anybody upload 8k internal ROM for this ecu?
Thanks
I´d like to disassemble MP3.1 bin. Can anybody upload 8k internal ROM for this ecu?
Thanks
Re: Peugeot motronic bins freshly ripped
Here you have 2 files from Motronic MP 3.1 Bosch nr 0261200695 fitted to Alfa 33 1.6 boxer.biela wrote:Hello
I´d like to disassemble MP3.1 bin. Can anybody upload 8k internal ROM for this ecu?
Thanks
32kb file are read with eprom reader, and 40 kb file are read with Tunerpro and Motronic plug-in, and contain the 8 kb internal rom.
I think the MP3.1 fitted to Peugeot/Citroen 1.9 engine, Bosch nr: 0261200202/0261200214 have same internal rom, because I have tried to swap eprom between the Alfa ecu 0261200695 and the Peugeot ecu, and the ecu work as normal.
However, I can make a full 40 kb read from the Peugeot ecu if needed.
Enjoy.
- Attachments
-
- WinOLS (Alfa 33_1.rar
- (16.11 KiB) Downloaded 358 times
-
- WinOLS (Alfa 33 (Original) - 1267358244_32kb).rar
- (12.52 KiB) Downloaded 339 times