VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
-
- Posts: 2877
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VZ V6 E55 ECU Brute Force Reset Tool
I've downloaded it but haven't had a chance to use it yet, will report back when I make time.
Re: VZ V6 E55 ECU Brute Force Reset Tool
no drama mate, thanks!
Re: VZ V6 E55 ECU Brute Force Reset Tool
Ill give it a go over the weekend when I get a chance to setup an E55 on the bench
Re: VZ V6 E55 ECU Brute Force Reset Tool
sweet, only if you get time mate! appreciated.
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: VZ V6 E55 ECU Brute Force Reset Tool
I've got a few here. I'll hook it up tomorrow and let them run.
Nice work!
Nice work!
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: VZ V6 E55 ECU Brute Force Reset Tool
I just tried on 2 ECUs. It crashes after trying to connect.
Both connected on the bench, both have comms in t2w, 1 I know is timer locked and the other is not at the timer stage.
Tried on Win10x64 with MDI2, VCM2 and the Autel J box.
Tried in Win7 x32 VM with MDI2.
Anything else I can try?
Both connected on the bench, both have comms in t2w, 1 I know is timer locked and the other is not at the timer stage.
Tried on Win10x64 with MDI2, VCM2 and the Autel J box.
Tried in Win7 x32 VM with MDI2.
Anything else I can try?
Re: VZ V6 E55 ECU Brute Force Reset Tool
Thanks for testing.
Do you have the passthrough driver installed for that cable? It doesn't look like it's finding the passthrough dll driver.
You'l also likely need windows 10 with latest Runtimes installed, check here.
https://support.microsoft.com/en-us/top ... f26a218cc0
Im not sure that MDI2 supports passthrough like other cables.
Do you have the passthrough driver installed for that cable? It doesn't look like it's finding the passthrough dll driver.
You'l also likely need windows 10 with latest Runtimes installed, check here.
https://support.microsoft.com/en-us/top ... f26a218cc0
Im not sure that MDI2 supports passthrough like other cables.
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: VZ V6 E55 ECU Brute Force Reset Tool
This is my main machine I use for programming with the mdi2 and other devices everyday so it definitely works.
I'll try another PC and get back
I'll try another PC and get back
Re: VZ V6 E55 ECU Brute Force Reset Tool
Tried and tested with vxnano and worked great on the bench.
Couldn't get it to work in vehicle no matter what options were chosen even upto 1000ms.
Would it be possible to write a program to security link the ecu back?
Couldn't get it to work in vehicle no matter what options were chosen even upto 1000ms.
Would it be possible to write a program to security link the ecu back?
Re: VZ V6 E55 ECU Brute Force Reset Tool
That's awesome, thanks for testing!
yes it could, i could add it to this but i hadn't as 99% of people using this tool would highly likely already have a scantool to do that.
In the one vehicle i know was tested with Gareth we used the suggested timing in vehicle and had silence bus enabled and it worked in vehicle.
yes it could, i could add it to this but i hadn't as 99% of people using this tool would highly likely already have a scantool to do that.
In the one vehicle i know was tested with Gareth we used the suggested timing in vehicle and had silence bus enabled and it worked in vehicle.