Just seeing what people are cdeveloping
15 posts
• Page 1 of 2 • 1, 2
Just seeing what people are cdeveloping
hi i was wondering if anyone needing help with there development atm im thinking of creating a tool to be able to use obdx pro vt with tech2win
Re: Just seeing what people are cdeveloping
Good luck.
You need to make a j2534 dll to communicate with tech2win,and than translate the output of dll to obdxpro. The J protocol is also non standard used by tech2win.
You need to make a j2534 dll to communicate with tech2win,and than translate the output of dll to obdxpro. The J protocol is also non standard used by tech2win.
Re: Just seeing what people are cdeveloping
The protocol is standard, just not the most common J2534. Its ISO 22900-2 D-PDU. https://www.iso.org/standard/41276.html (first 10 pages preview) https://www.sis.se/api/document/preview/69232/
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396
Re: Just seeing what people are cdeveloping
yer i have to pay for that was hoping someone would share also the first link isnt in english
- MudDuck514
- Posts: 245
- Joined: Wed Jul 05, 2017 8:30 am
- Location: North TX, USA
Re: Just seeing what people are cdeveloping
Tech2Win uses the ISO 22900-2 Diagnostic-Protocol Data Unit (D-PDU) API and RP1210 API.
Tazzi is still (?) working on the J2534 support.
Tazzi is still (?) working on the J2534 support.
Re: Just seeing what people are cdeveloping
MudDuck514 wrote:Tech2Win uses the ISO 22900-2 Diagnostic-Protocol Data Unit (D-PDU) API and RP1210 API.
Tazzi is still (?) working on the J2534 support.
The J2534 side I am, I have been bogged down with OBDX development along with helping implementation of future support for E38 and newer ecus into lsdroid
I have the J2534 dll 99% completed. It does recognise with J2534 application including pcmhammer, GM ACDELCO, GDS2 ect. I still have a few commands that the dealer software are calling to which I have not added yet, but appears to be at least doing all the 'major' commands.
The D-PDU is similar to that of J2534 where there is a standardized command set. Difference being there is different commands and requirements for returned data.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726

Site:www.envyouscustoms.com
Mob:+61406 140 726
Re: Just seeing what people are cdeveloping
Ok so no point working on will you be releasing this any time soon or do you need help with it
Re: Just seeing what people are cdeveloping
modzer321 wrote:Ok so no point working on will you be releasing this any time soon or do you need help with it
I am not working on the D-PDU api.
Only the J2534, but this is closed source so its coding is not available to the public.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726

Site:www.envyouscustoms.com
Mob:+61406 140 726
Re: Just seeing what people are cdeveloping
modzer321 wrote:are you going to release what you made or no
Oh course, otherwise there would be no point making it

Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726

Site:www.envyouscustoms.com
Mob:+61406 140 726
15 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 3 guests