Just seeing what people are cdeveloping

Posts: 29
Joined: Mon Sep 07, 2020 8:07 pm

Just seeing what people are cdeveloping

Postby modzer321 » Wed Jan 12, 2022 10:14 pm

hi i was wondering if anyone needing help with there development atm im thinking of creating a tool to be able to use obdx pro vt with tech2win

Posts: 407
Joined: Sun Apr 10, 2016 9:20 pm

Re: Just seeing what people are cdeveloping

Postby kur4o » Thu Jan 13, 2022 6:43 am

Good luck.

You need to make a j2534 dll to communicate with tech2win,and than translate the output of dll to obdxpro. The J protocol is also non standard used by tech2win.

Site Admin
User avatar
Posts: 6801
Joined: Sat Feb 28, 2009 8:34 pm

Re: Just seeing what people are cdeveloping

Postby antus » Thu Jan 13, 2022 9:47 am

The protocol is standard, just not the most common J2534. Its ISO 22900-2 D-PDU. https://www.iso.org/standard/41276.html (first 10 pages preview) https://www.sis.se/api/document/preview/69232/
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 29
Joined: Mon Sep 07, 2020 8:07 pm

Re: Just seeing what people are cdeveloping

Postby modzer321 » Thu Jan 13, 2022 1:19 pm

yer i have to pay for that was hoping someone would share also the first link isnt in english

Posts: 211
Joined: Wed Jul 05, 2017 8:30 am
Location: North TX, USA

Re: Just seeing what people are cdeveloping

Postby MudDuck514 » Thu Jan 13, 2022 3:29 pm

Tech2Win uses the ISO 22900-2 Diagnostic-Protocol Data Unit (D-PDU) API and RP1210 API.

Tazzi is still (?) working on the J2534 support.

User avatar
Posts: 2597
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: Just seeing what people are cdeveloping

Postby Tazzi » Thu Jan 13, 2022 5:42 pm

MudDuck514 wrote:Tech2Win uses the ISO 22900-2 Diagnostic-Protocol Data Unit (D-PDU) API and RP1210 API.

Tazzi is still (?) working on the J2534 support.


The J2534 side I am, I have been bogged down with OBDX development along with helping implementation of future support for E38 and newer ecus into lsdroid

I have the J2534 dll 99% completed. It does recognise with J2534 application including pcmhammer, GM ACDELCO, GDS2 ect. I still have a few commands that the dealer software are calling to which I have not added yet, but appears to be at least doing all the 'major' commands.

The D-PDU is similar to that of J2534 where there is a standardized command set. Difference being there is different commands and requirements for returned data.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

Posts: 29
Joined: Mon Sep 07, 2020 8:07 pm

Re: Just seeing what people are cdeveloping

Postby modzer321 » Sun Jan 16, 2022 2:02 am

Ok so no point working on will you be releasing this any time soon or do you need help with it

User avatar
Posts: 2597
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: Just seeing what people are cdeveloping

Postby Tazzi » Sun Jan 16, 2022 11:34 am

modzer321 wrote:Ok so no point working on will you be releasing this any time soon or do you need help with it

I am not working on the D-PDU api.
Only the J2534, but this is closed source so its coding is not available to the public.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

Posts: 29
Joined: Mon Sep 07, 2020 8:07 pm

Re: Just seeing what people are cdeveloping

Postby modzer321 » Sun Jan 16, 2022 6:30 pm

are you going to release what you made or no

User avatar
Posts: 2597
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: Just seeing what people are cdeveloping

Postby Tazzi » Sun Jan 16, 2022 9:01 pm

modzer321 wrote:are you going to release what you made or no

Oh course, otherwise there would be no point making it :thumbup:
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

Next

Return to Tool Development

Who is online

Users browsing this forum: No registered users and 2 guests