Open source GM OBD2 flash tool using a ELM327 device
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: Open source GM OBD2 flash tool using a ELM327 device
Hi All,
Just a quick question.
What App(s) are each of you using to develop the code for the app?
I tried opening the "flash411" project files in MS Visual Studio 2010 and it says it need a NEWER version.
SO, I am unable to try to build the app.
I really wanted to check it out.
Mike
Just a quick question.
What App(s) are each of you using to develop the code for the app?
I tried opening the "flash411" project files in MS Visual Studio 2010 and it says it need a NEWER version.
SO, I am unable to try to build the app.
I really wanted to check it out.
Mike
Re: Open source GM OBD2 flash tool using a ELM327 device
I'm using:
MS Visual Studio 2017
Version 15.6.6
MS Visual Studio 2017
Version 15.6.6
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
Re: Open source GM OBD2 flash tool using a ELM327 device
Does anyone have a link to the webpage where I can purchase an Allpro USB Adapter?
I've had no luck finding it.
Thanks.
I've had no luck finding it.
Thanks.
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: Open source GM OBD2 flash tool using a ELM327 device
Chuff,
I found the link at the bottom of page 28.
However, I'll repost it for you here.
http://www.obddiag.net/products.html
Mike
I found the link at the bottom of page 28.
However, I'll repost it for you here.
http://www.obddiag.net/products.html
Mike
Re: Open source GM OBD2 flash tool using a ELM327 device
I'm using the "Community Edition" of Visual Studio 2017. It's free.
https://www.visualstudio.com/free-developer-offers/
https://www.visualstudio.com/free-developer-offers/
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: Open source GM OBD2 flash tool using a ELM327 device
NSFW,
Thanks for that information. I just happened to run across that link earlier this evening. Will need to take a laptop to my friends house in order to download it! DON'T think I want to use my cellphone data for that.
Good to know it will work for this project. BTW, did you install the C++ Version or another one as there seems to be several option(other than downloading the FULL app package).
Mike
Thanks for that information. I just happened to run across that link earlier this evening. Will need to take a laptop to my friends house in order to download it! DON'T think I want to use my cellphone data for that.
Good to know it will work for this project. BTW, did you install the C++ Version or another one as there seems to be several option(other than downloading the FULL app package).
Mike
Re: Open source GM OBD2 flash tool using a ELM327 device
So at the bottom of that page are 2 fields for using Paypal: $Amount & Notes.MudDuck514 wrote:Chuff,
I found the link at the bottom of page 28.
However, I'll repost it for you here.
http://www.obddiag.net/products.html
Mike
So just enter the $AU amount equal to $35US and enter into the notes what it is that I'm paying for and my address details?
Is this what everyone else has done to purchase their adapters?
Thanks.
Chuff
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Open source GM OBD2 flash tool using a ELM327 device
It was a while ago when i bought mine. I would expect that link to take you in to paypay to confirm and you should be able to select USD. So i'd start at 35 and make sure its USD and take it from there. Note that it doesnt mention post costs either. Finally ask if it ships with firmware 1.17 for 4x vpw, incase he has older stock. Let us know how you go!
For compilation you need C# and its .net v4.6.x i think from memory and it uses newer features of .net so cant be compiled or run with older visual studio/.net versions.
For compilation you need C# and its .net v4.6.x i think from memory and it uses newer features of .net so cant be compiled or run with older visual studio/.net versions.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Open source GM OBD2 flash tool using a ELM327 device
I'm assuming you're talking about the compilation of the github firmware project?antus wrote:For compilation you need C# and its .net v4.6.x i think from memory and it uses newer features of .net so cant be compiled or run with older visual studio/.net versions.
I stopped coding years ago and don't have visual studio. Hell, I don't even have any Windows PCs at present. Everything I own that has to have an OS now runs Linux.
I'm happy to set up a VM for Windows (probably Win7), but that still leaves me short as I don't have visual studio.
Any suggestions would be much appreciated.
Thanks.
Chuff
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Open source GM OBD2 flash tool using a ELM327 device
Sorry no, that comment was for MudDuck514 whos trying to compile the app. You dont need to compile the firmware but if you want to anyway follow the instructions on obddiag.net and use NXP MCUXpresso. Im running Linux here, windows in a VM for visual studio. In practice though the app is not useful yet, compilation is for developers. I think we will do periodic binary releases which you can run when it starts doing things people can use.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396