Seed/Key Osid and Vin retrieval via Elm
Re: Seed/Key Osid and Vin retrieval via Elm
Guess I could change the baud in the application to be default at 38400. Not sure if planethax would be very happy if I edited his work.
Its old tech anyways.
Its old tech anyways.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Seed/Key Osid and Vin retrieval via Elm
I reckon go for it an post it back to this thread in a zip with a readme or changelog mentioning your hack. Its not like you'd be stealing attribution for his work, just improving it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Seed/Key Osid and Vin retrieval via Elm
Sounds like a plan.. back in a flash..
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Seed/Key Osid and Vin retrieval via Elm
Attached is updated file.
Seems to load up fine. Havent actually tried it out on a LS1 ecu yet though!
Seems to load up fine. Havent actually tried it out on a LS1 ecu yet though!
- Attachments
-
- flasher.rar
- (25.61 KiB) Downloaded 918 times
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Seed/Key Osid and Vin retrieval via Elm
Just tested it ,works fine ,gets seed and key ,osid no problem ,seems to crash if you hit "get vin", but that doesn't matter.
Tried a brand new elm327 from china , wouldnt work straight out of packet on default settings
Only commands I sent to get it working were
atsp2
atl1
Tried a brand new elm327 from china , wouldnt work straight out of packet on default settings
Only commands I sent to get it working were
atsp2
atl1
Re: Seed/Key Osid and Vin retrieval via Elm
Haha.. I probably mucked something up then if it decided to crash the "get vin".
May try again tomorrow and see if I cant fix that.
Ill try on the ecu here, see if I cant get it going straight out of packet. If need be, will see if I cant even add in the ATSP2 and ATL1 commands. Even a quick addon program that sends those two frames then starts up the main application will do.
May try again tomorrow and see if I cant fix that.
Ill try on the ecu here, see if I cant get it going straight out of packet. If need be, will see if I cant even add in the ATSP2 and ATL1 commands. Even a quick addon program that sends those two frames then starts up the main application will do.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Seed/Key Osid and Vin retrieval via Elm
I double checked my changes. Nothing else was modified apart from the baud. Should be no reason it fails, unless it always use to fail on VIN request? (Never used planethax's bruteforcer)
If interests there, Ill make something to automatically inject the required setup frames, and then autolaunch planethaxs software. Could even launch direct from memory so everything is in one application.
If interests there, Ill make something to automatically inject the required setup frames, and then autolaunch planethaxs software. Could even launch direct from memory so everything is in one application.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 7
- Joined: Wed Dec 20, 2017 4:09 am
- cars: 2006 BMW 325i
2001 BMW 330i
2001 BMW X5
2003 GSXR
Thos are my main rides currently
Re: Seed/Key Osid and Vin retrieval via Elm
Great info guy's thanks. I use a non ELM interface and used this info to write a little script to find the seed key. It's running now. Will see how many hours it takes
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: Seed/Key Osid and Vin retrieval via Elm
Hey guys will this work with an E67 LSA ecu?
I'm trying it now. This is what it looks like
I'm trying it now. This is what it looks like
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Seed/Key Osid and Vin retrieval via Elm
Does not look right with all the errors. We have a new tool under development now for earlier pcms but e67 would be later.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396