AU falcon read/write

Ford information and tools can be found here
User avatar
Posts: 121
Joined: Wed Jun 08, 2016 8:56 pm

AU falcon read/write

Postby 80gus » Wed May 16, 2018 7:12 pm

Looking at helping a guy out with security removal on a AU falcon ecu, I know SCT support read write in the car. Is there any other methods / software / hardware available that others may know of that allow read write into bin file? I’ve done a bit of google searching with little to no leads.

Site Admin
User avatar
Posts: 5258
Joined: Sat Feb 28, 2009 8:34 pm

Re: AU falcon read/write

Postby antus » Wed May 16, 2018 7:22 pm

Try this thread. Its the development thread, so you might just want to this the pcmtec site from the first post.

viewtopic.php?f=41&t=4940
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 121
Joined: Wed Jun 08, 2016 8:56 pm

Re: AU falcon read/write

Postby 80gus » Wed May 16, 2018 7:36 pm

Thanks Anths, rolls and the guys at PCMtech at this stage only support BA onwards, AU is something that’s probably not ever going to get developed due to the increasing popularity with the barra motor, and how cheap they are.
AU is way past it’s used by date.

Posts: 2306
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: AU falcon read/write

Postby VX L67 Getrag » Thu May 17, 2018 10:12 am

Yeah I've done a few read/write with EECV in question over the OBD with Kess tool!

It's then just a matter of knowing what each bank is & they way they get laid out!

User avatar
Posts: 121
Joined: Wed Jun 08, 2016 8:56 pm

Re: AU falcon read/write

Postby 80gus » Thu May 17, 2018 2:15 pm

VX L67 Getrag wrote:Yeah I've done a few read/write with EECV in question over the OBD with Kess tool!

It's then just a matter of knowing what each bank is & they way they get laid out!


Thanks i just had a bit of a look at some bins i found on the net, i think i see what you mean by banks, they look nothing like the Ba onwards, and almost appears to have no vin section, just a serial (unless the ones i got had that removed already)

Return to Ford ECUs

Who is online

Users browsing this forum: No registered users and 1 guest