Mk1 capri, plans, complete noob
Re: Mk1 capri, plans, complete noob
just another quick one, I was going over my wiring today and noticed the oil pressure sensor from a factory vn loom doesn't actually talk to the ecm so I cross referenced it with the wiring info on the 12p thread and the isn't an input is that correct?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Mk1 capri, plans, complete noob
yes oil pressure is only for fuel pump backup and dash light it doesnt goto ecu.and you dont need the backup fuel pump part
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Mk1 capri, plans, complete noob
cheers also I had what looked like a coolant sensor on a single green wire that didn't go to one of the ecu plugs but one of the other ones I imagine that just for the temp guage as well and not relevant to the ecm
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Mk1 capri, plans, complete noob
yeah single green is dash wire for temp
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Mk1 capri, plans, complete noob
another quick one guys, is there any earths in the wiring loom that should not be connected to each other? like high/low voltage earths?
Re: Mk1 capri, plans, complete noob
there are 2 types of earth, power earth for noisy switching loads and there is a quiet earth for sensitive circuits like sensors, these must be physically separate connections
Re: Mk1 capri, plans, complete noob
Can anyone please tell me what position the wires for the tps sensor plug need to be in as mine got cut out and dissassembled by a "helper"
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Mk1 capri, plans, complete noob
Near the throttle body? They end up pretty much in the same physical location of the loom as the IAC. Wiring pinouts and colours are the same as on a VR, the connector should be labelled ABC .. https://pcmhacking.net/forums/viewtopic.php?f=32&t=337
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Mk1 capri, plans, complete noob
Does this help? Have a vague feeling the N13 loom has blue grey and black though, which must mean this is a JE camira loom. Can probably cross reference the colours with the JE and N13 wiring diagrams in the 12p thread.
- Attachments
-
- tps connector.jpg (62.67 KiB) Viewed 8699 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396