VCM2 driver.

Ford information and tools can be found here
Post Reply
User avatar
80gus
Posts: 139
Joined: Wed Jun 08, 2016 8:56 pm
Location: Brisbane QLD

VCM2 driver.

Post by 80gus »

Anybody know where or have a driver for the vcm2 (clone) id like to try using it as a j2534 pass through and am struggling to find a driver.
Ive googled it with little to no luck.
Anybody else git it working with IDS, id like to have a bit of a play with it.
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: VCM2 driver.

Post by Tazzi »

Message sent :thumbup:
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
User avatar
80gus
Posts: 139
Joined: Wed Jun 08, 2016 8:56 pm
Location: Brisbane QLD

Re: VCM2 driver.

Post by 80gus »

Still searching i found the latest VCM@ program/driver and it doesnt work most likely because the cable is a dodgie clone, or its an actually faulty cable. still chassing an older drivervcm2 program if any1 can help.
lukecomer
Posts: 2
Joined: Tue Oct 10, 2017 8:40 pm
cars: fg xr50 turbo

Re: VCM2 driver.

Post by lukecomer »

I have a full set of drivers for genuine/clone about 20+ different drivers, have you tried reflashing? I found with my clone it will ru on 15/20 drivers but must be reflashing for each one. need any info pm me
User avatar
rolls
Posts: 407
Joined: Wed Sep 07, 2016 11:22 am
cars: bf xr6t falcon

Re: VCM2 driver.

Post by rolls »

Post Reply