Ford Bin file

Ford information and tools can be found here
Posts: 97
Joined: Mon Apr 13, 2009 10:11 am

Ford Bin file

Postby Yortt » Fri Feb 16, 2018 10:32 am

Is there any software/hardware available that will read and write a complete bin file for the FG falcon.
Thanks

User avatar
Posts: 1806
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: Ford Bin file

Postby Tazzi » Fri Feb 16, 2018 10:36 am

Early betas of Rolls program could. Not sure if they are still available though.
Image

Posts: 97
Joined: Mon Apr 13, 2009 10:11 am

Re: Ford Bin file

Postby Yortt » Fri Feb 16, 2018 12:35 pm

Tazzi wrote:Early betas of Rolls program could. Not sure if they are still available though.


Thanks for the reply, I have a copy of Rolls early beta program which he sent me but it misses two lines of code when I write to a PCM to clone a spare PCM hence the car does not recognise it.

User avatar
Posts: 382
Joined: Wed Sep 07, 2016 11:22 am

Re: Ford Bin file

Postby rolls » Wed Apr 11, 2018 3:18 pm

Yortt wrote:
Tazzi wrote:Early betas of Rolls program could. Not sure if they are still available though.


Thanks for the reply, I have a copy of Rolls early beta program which he sent me but it misses two lines of code when I write to a PCM to clone a spare PCM hence the car does not recognise it.


You can't clone a PCM. Addresses below 0x10000 are not writable via OBD, the serial number is stored here along with some other stuff, this will stop a cloned PCM from working. If you wrote a bootloader it may be possible.

Basically you will need to recode keys/pats if you try to swap the physical PCM over.

Return to Ford ECUs

Who is online

Users browsing this forum: No registered users and 1 guest