reading fg clusters

Ford information and tools can be found here
Posts: 1
Joined: Fri Jan 11, 2019 8:12 pm

reading fg clusters

Postby shadowgun » Fri Jan 11, 2019 8:29 pm

hey fellas

recently brought an f6 fg cluster to put on an xr6t as a project and apparently only ford can reprogram these clusters again to link to pats correctly and start the car

was reading through here and found a way to get ford ids program working and link it with an openport 2.0 (ive got it all working and reads the car kinda)

my drama is it doesnt seem to pickup the instrument cluster whenever i scan for it, i can pickup the hvac, pcm, tcm etc but i noticed it doesnt pickup the cluster

has anyone found a way to relink the cluster, and if possible adjust the kms to match my old cluster

car is 09 mk1 fg xr6t im reading off, using ids 112.01 software on an openport 2.0 cable


Posts: 1
Joined: Mon Jan 21, 2019 10:35 am

Re: reading fg clusters

Postby Whiteford » Mon Jan 21, 2019 10:38 am

Hey Shadowgun,
I have seen this in the past. For some reason the openport is unable to switch effectively between HS can and MS can when working with IDS. The only option is to use a VCM/VCM2. I do this programming within Melbourne. Feel free to PM me for further details and costing.

Return to Ford ECUs

Who is online

Users browsing this forum: No registered users and 2 guests