EEPOD MCS1

Ford information and tools can be found here
Post Reply
PSM 64
Posts: 13
Joined: Sat May 12, 2018 6:57 pm

EEPOD MCS1

Post by PSM 64 »

Anyone with a EEPOD MCS1? Have a bench top setup with 6.4L PCM trying to connect to it. It will connect with PTDIAG. But it will not connect with anything else. Forscan it picks up the mcs1 but fails to identify the benchtop (PCM) (My VCMII works just fine). It keeps prompting to update the MCS1 firmware when connected to eepods J2534 test application.

Saying "the firmware version doesn't match the library version and to press "ok" to update". Press OK to update and then reconnect and it prompts to do the same thing over again and the firmware version never changes..

Firmware version is v2.39 while the library is 2.40
PSM 64
Posts: 13
Joined: Sat May 12, 2018 6:57 pm

Re: EEPOD MCS1

Post by PSM 64 »

Got it fixed up
decipha
Posts: 8
Joined: Tue Nov 26, 2013 3:03 am
cars: too many
Location: New Orleans, LA
Contact:

Re: EEPOD MCS1

Post by decipha »

what was the issue?

You wouldn't happen to know where I can find a spare eepod mcs1 would you?
Decipha @ EFIDynoTuning
PSM 64
Posts: 13
Joined: Sat May 12, 2018 6:57 pm

Re: EEPOD MCS1

Post by PSM 64 »

decipha wrote:what was the issue?

You wouldn't happen to know where I can find a spare eepod mcs1 would you?

Wrong library's, they didn't support that newest one it was asking for. it was a beta version that never made it to production.
Post Reply