Ranger airbag module reset
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Ranger airbag module reset
Who can help me read this and clear crash data
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 583
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: Ranger airbag module reset
Not a ford guy but this other site had the info I needed for my GM airbag reset
https://www.digital-kaos.co.uk/forums/s ... =ford+ab39
https://www.digital-kaos.co.uk/forums/s ... =ford+ab39
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Ranger airbag module reset
Yeah I found the clear file on digital chaos now to figure out how to program via can
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 583
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: Ranger airbag module reset
That would be waaay over my head.. i just pulled the eeprom and read it with an xprog.. not sure on ford but mine came apart a LOT easier than any ecu...lol
Re: Ranger airbag module reset
got a picture of the insides?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Ranger airbag module reset
Not the best pics I seen the 8 pin chip and hoped it was the memory but it's the nxc CAN chip
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Ranger airbag module reset
Must be eeprom in the processors then, other look like ram or something else. What's the 2 processors?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Ranger airbag module reset
Thank you can you get me that picture mate not a member on there so can't veiw it big
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem