The logger defs are fixed, and I also added a bunch of parameters that were listed on a post at Gearhead-EFI.
But, I don't see what's wrong with the MAF sensor and run time parameters. Can you please post some data from the Debug pane?
Get the latest code. (Don't use the current code for this...)
viewtopic.php?f=42&t=6688&p=107666#p107666
Create and save an empty log profile. (I just fixed a bug related to creating new profiles.)
Open the log profile that has the MAF / run time issue, and log data until you hit the sign problem.
Select the empty log profile. (This stops the debug pane from scrolling.)
Then go to the debug pane.
Near the top, there will be a bunch of repeating pattersn of "TX" followed by "RX" followed by "Configured [parameter name]" Copy and paste all of those.
Near the end, there will be a log of repeating patterns with a TX line followed by one or more RX lines. Copy one of those (a TX and the following RX lines) from near the end.
The copied data should look something like this:
Code: Select all
[08:36:23:320] TX: 2CFE4A0010FFFF
[08:36:23:368] RX: 6C F0 10 6C FE 4A
[08:36:23:369] Configured MAF Sensor, g/s
[08:36:23:369] TX: 2CFE5A000CFFFF
[08:36:23:417] RX: 6C F0 10 6C FE 5A
[08:36:23:417] Configured Engine Speed, RPM
[08:36:23:417] TX: 2CFE690004FFFF
[08:36:23:467] RX: 6C F0 10 6C FE 69
[08:36:23:467] Configured Engine Load, %
[08:36:23:467] TX: 2CFE71000BFFFF
[08:36:23:518] RX: 6C F0 10 6C FE 71
[08:36:23:518] Configured MAP Sensor, kPa
[08:36:23:518] TX: 2CFD491142FFFF
[08:36:23:567] RX: 6C F0 10 6C FD 49
[08:36:23:567] Configured MAP Sensor, kpa?
[08:36:23:567] TX: 2CFD5111A6FFFF
[08:36:23:616] RX: 6C F0 10 6C FD 51
[08:36:23:616] Configured Knock Retard, °
[08:36:23:616] TX: 2CFD59125DFFFF
[08:36:23:671] RX: 6C F0 10 7F 2C FD 59 12 5D FF 31
[08:36:23:671] TX: 2CFD61125EFFFF
[08:36:23:720] RX: 6C F0 10 7F 2C FD 61 12 5E FF 31
[08:36:23:720] TX: 2CFD691922FFFF
[08:36:23:766] RX: 6C F0 10 6C FD 69
[08:36:23:766] Configured Power Enrichment, Boolean
[08:17:27:647] TX: 2A01FEFD
[08:17:27:745] RX: 6C F0 10 6A FE 00 00 00 00 00 0A
[08:17:27:745] RX: 6C F0 10 6A FD 00 00 01 01 01 00
And include a screenshot of the parameter names and values.
Thanks!
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!