bobcratchet555 wrote:Thanks Gampy. This is what it shows. Looks like something funky in the GUI?
gui_bug.JPG
Bug.
I will check this later.
Can't reproduce this behaviour, but modified gui anyway. Should be fixed in 0.17.126
Added setting:
Patcher -> Setting -> More Settings -> Set patcher as startup window
bobcratchet555 wrote:Thanks Gampy. This is what it shows. Looks like something funky in the GUI?
gui_bug.JPG
Bug.
I will check this later.
Can't reproduce this behaviour, but modified gui anyway. Should be fixed in 0.17.126
Added setting:
Patcher -> Setting -> More Settings -> Set patcher as startup window
Joukoy, thanks for looking into this. The fix worked on my side, i now see the tabs as expected.
This is what I have in torque that same in pcmlogger. I have a few tiny leaks before turbo so at idle it 16.5 17 afr. As I'm driving it drops to 14.5 to 15 afr not sure if it the math is off or the fuel table. But it's closer the I've ever been. Next I'm gonna figure out the math to change map volts to kpa for 2 and 3 bar sensors that way I can log boost.
I'm interested in the fuel pressure pid as well will be watching and if I come actossed it I'll let you know.