Hi,
I'm in the middle of dropping an ls1 & t56 into my VS ute. I want to get the fuel consumption functions of the level 3 dash working but I don't know which ecu pin to wire it into. Anyone have any ideas??
Thanks for the help,
Alex
LS1 ecu fuel consumption output
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: LS1 ecu fuel consumption output
I cant say for sure but I think it is not compatible. I think ls1 fuel consumption data comes out on the VPW data bus of later models and through the PIM to convert to ALDL and then in to the later model dash boards as serial data. Where as the VS signal is PWM on its own pin. If someone knows an option to reconfigure the '0411 pcm to provide a compatible signal let us know...
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396