Mafless ls1

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
Posts: 52
Joined: Sun Dec 05, 2010 7:22 pm

Mafless ls1

Postby pas94 » Sat Jul 30, 2016 8:26 am

Hi,
My friend has an ls1 he wants to put in a model A. He wants to run itbs. He has no loom or computer at this stage, just looking for the best way to run it. Any advice on which computer to use? I have wide band, timing light and eeprom programmer.
Thanks
Paul

Posts: 3143
Joined: Mon Aug 02, 2010 6:35 pm

Re: Mafless ls1

Postby Dylan » Sat Jul 30, 2016 8:50 am

Best way will be with an 0411 PCM and a new wiring loom made to suit will be best for that.

Posts: 670
Joined: Tue May 10, 2016 5:48 pm

Re: Mafless ls1

Postby MAGP » Sat Jul 30, 2016 9:50 am

You'll also probably need to run a vacuum port off each TB to a junction and then from the junction to the MAP sensor.
You would, in effect, be running a modified Callaway C4B type setup but with ITBS instead of 1 TB.

Posts: 3143
Joined: Mon Aug 02, 2010 6:35 pm

Re: Mafless ls1

Postby Dylan » Sat Jul 30, 2016 9:57 am

Seen that done on an LSX worked good in the end. Look up the VR Senator on street commodores or commodores plus. Has an LSX 454 in it.

Posts: 52
Joined: Sun Dec 05, 2010 7:22 pm

Re: Mafless ls1

Postby pas94 » Sat Jul 30, 2016 11:31 am

What's the 0411 pcm from? Will it work with the factory crank and cam sensors and coils?

Posts: 3143
Joined: Mon Aug 02, 2010 6:35 pm

Re: Mafless ls1

Postby Dylan » Sat Jul 30, 2016 1:32 pm

That's the service number for the LS1 PCM with cable throttle body. VT VX VY Holden LS1.

Site Admin
User avatar
Posts: 5629
Joined: Sat Feb 28, 2009 8:34 pm

Re: Mafless ls1

Postby antus » Sat Jul 30, 2016 4:30 pm

Yep. Technically its the last 4 numbers of the service number (not the whole number) but thats what people call them. Used on ls1 applications here and in the states (and likely elsewhere). When searching use 0411 ecm for lots of hits.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 52
Joined: Sun Dec 05, 2010 7:22 pm

Re: Mafless ls1

Postby pas94 » Mon Aug 01, 2016 5:08 pm

What's the best software to use to program it? Most seem to be licence based what's a rough idea of cost?

User avatar
Posts: 1806
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: Mafless ls1

Postby Tazzi » Mon Aug 01, 2016 5:18 pm

pas94 wrote:What's the best software to use to program it? Most seem to be licence based what's a rough idea of cost?

Well.. guess that means your more looking into what commerical tuning package you want to go with?

The two main ones are HPTuners and EFILive. Roughly 100usd I think (2credits) using HPTuners.
Or, when you buy the HPTuners kit, they include 8 credits I think.
Image

Posts: 3143
Joined: Mon Aug 02, 2010 6:35 pm

Re: Mafless ls1

Postby Dylan » Mon Aug 01, 2016 5:40 pm

Tazzi wrote:
pas94 wrote:What's the best software to use to program it? Most seem to be licence based what's a rough idea of cost?

Well.. guess that means your more looking into what commerical tuning package you want to go with?

The two main ones are HPTuners and EFILive. Roughly 100usd I think (2credits) using HPTuners.
Or, when you buy the HPTuners kit, they include 8 credits I think.


What alternatives are you aware of Tazzi? Non commercial?

Next

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 1 guest