Mafless ls1
Mafless ls1
Hi,
My friend has an ls1 he wants to put in a model A. He wants to run itbs. He has no loom or computer at this stage, just looking for the best way to run it. Any advice on which computer to use? I have wide band, timing light and eeprom programmer.
Thanks
Paul
My friend has an ls1 he wants to put in a model A. He wants to run itbs. He has no loom or computer at this stage, just looking for the best way to run it. Any advice on which computer to use? I have wide band, timing light and eeprom programmer.
Thanks
Paul
Re: Mafless ls1
Best way will be with an 0411 PCM and a new wiring loom made to suit will be best for that.
Re: Mafless ls1
You'll also probably need to run a vacuum port off each TB to a junction and then from the junction to the MAP sensor.
You would, in effect, be running a modified Callaway C4B type setup but with ITBS instead of 1 TB.
You would, in effect, be running a modified Callaway C4B type setup but with ITBS instead of 1 TB.
Re: Mafless ls1
Seen that done on an LSX worked good in the end. Look up the VR Senator on street commodores or commodores plus. Has an LSX 454 in it.
Re: Mafless ls1
What's the 0411 pcm from? Will it work with the factory crank and cam sensors and coils?
Re: Mafless ls1
That's the service number for the LS1 PCM with cable throttle body. VT VX VY Holden LS1.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Mafless ls1
Yep. Technically its the last 4 numbers of the service number (not the whole number) but thats what people call them. Used on ls1 applications here and in the states (and likely elsewhere). When searching use 0411 ecm for lots of hits.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Mafless ls1
What's the best software to use to program it? Most seem to be licence based what's a rough idea of cost?
Re: Mafless ls1
Well.. guess that means your more looking into what commerical tuning package you want to go with?pas94 wrote:What's the best software to use to program it? Most seem to be licence based what's a rough idea of cost?
The two main ones are HPTuners and EFILive. Roughly 100usd I think (2credits) using HPTuners.
Or, when you buy the HPTuners kit, they include 8 credits I think.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Mafless ls1
What alternatives are you aware of Tazzi? Non commercial?Tazzi wrote:Well.. guess that means your more looking into what commerical tuning package you want to go with?pas94 wrote:What's the best software to use to program it? Most seem to be licence based what's a rough idea of cost?
The two main ones are HPTuners and EFILive. Roughly 100usd I think (2credits) using HPTuners.
Or, when you buy the HPTuners kit, they include 8 credits I think.