P01 '0411 12200411 v6 support

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 12200411 tune Disassembly (12225074)

Post by Holden202T »

no its just a stock VR V6 cam sensor setup.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 12200411 tune Disassembly (12225074)

Post by Dylan »

Possibly different. I know the V8's running low res mode have a 4X crank trigger and a 1X cam from the dissy and the cam signal is half cam rotation looking at the chopper wheel on them.
User avatar
Apples
Posts: 151
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT
Contact:

Re: 12200411 tune Disassembly (12225074)

Post by Apples »

Here is a 4.3 V6 low res crank and cam pattern look like.
4.3 cam crank waveform.jpg
4.3 cam crank waveform.jpg (6.83 KiB) Viewed 5738 times
Here is the V8 low res crank and cam pattern.
V8 cam crank waveform.jpg
V8 cam crank waveform.jpg (7.57 KiB) Viewed 5725 times
Last edited by Apples on Fri Nov 11, 2016 10:46 am, edited 1 time in total.
Don't make excuses. Make more horsepower.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 12200411 tune Disassembly (12225074)

Post by Dylan »

Thanks haven't got the V8 one too have you?
User avatar
Apples
Posts: 151
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT
Contact:

Re: 12200411 tune Disassembly (12225074)

Post by Apples »

Found picture of OEM V6 Low res crank sensor.
OEM V6 sensor.jpg
OEM V6 sensor.jpg (89.73 KiB) Viewed 5729 times
This is the 24x conversion sensor wheel
24x conversion.png
24x conversion.png (33.35 KiB) Viewed 5729 times
now if I can make it fit a V6 balancer.

here is the 24x sensor wheel to degrees.
LS1 24X Crank.jpg
Don't make excuses. Make more horsepower.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 12200411 tune Disassembly (12225074)

Post by Dylan »

There's a model can't remember the name of V6 with the 0411 and it takes the 18X 3X crank and 1X cam. I'll see if I kept the link or maybe you're onto it all ready. Haven't followed the V6 to much so looked over it quickly.
User avatar
Apples
Posts: 151
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT
Contact:

Re: 12200411 tune Disassembly (12225074)

Post by Apples »

I haven't seen a V6 using 18x 3x and 1x cam on a 411 from the factory.
that's not to say they don't exist.
Don't make excuses. Make more horsepower.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 12200411 tune Disassembly (12225074)

Post by Dylan »

Fair chance I misread it. Would of been in the 1998 2002 era if it was.
Whats your plans anyway convert a V6 of yours to to the 0411? Once you have the trigger pattern sorted it's just like any other conversion.
User avatar
Apples
Posts: 151
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT
Contact:

Re: 12200411 tune Disassembly (12225074)

Post by Apples »

well my plan is to try and run a V6 with ls1 coils and 411 pcm with auto.
then later on add 3 bar mafless tune.
I want to do it with out opening and modding the pcm.
Don't make excuses. Make more horsepower.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 12200411 tune Disassembly (12225074)

Post by Dylan »

Sounds good keep us posted. Those low res trace pictures you posted. Do you have the whole manual for those models or just those images? Any chance you could PM a copy if you do?
Post Reply