P01 '0411 12200411 v6 support

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
User avatar
Posts: 9588
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 12200411 tune Disassembly (12225074)

Postby Holden202T » Thu Nov 10, 2016 9:29 pm

no its just a stock VR V6 cam sensor setup.

Online
Posts: 3136
Joined: Mon Aug 02, 2010 6:35 pm

Re: 12200411 tune Disassembly (12225074)

Postby Dylan » Thu Nov 10, 2016 9:35 pm

Possibly different. I know the V8's running low res mode have a 4X crank trigger and a 1X cam from the dissy and the cam signal is half cam rotation looking at the chopper wheel on them.

User avatar
Posts: 149
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT

Re: 12200411 tune Disassembly (12225074)

Postby Apples » Fri Nov 11, 2016 8:30 am

Here is a 4.3 V6 low res crank and cam pattern look like.

4.3 cam crank waveform.jpg
4.3 cam crank waveform.jpg (6.83 KiB) Viewed 1647 times


Here is the V8 low res crank and cam pattern.

V8 cam crank waveform.jpg
V8 cam crank waveform.jpg (7.57 KiB) Viewed 1634 times
Last edited by Apples on Fri Nov 11, 2016 10:46 am, edited 1 time in total.
Don't make excuses. Make more horsepower.

Online
Posts: 3136
Joined: Mon Aug 02, 2010 6:35 pm

Re: 12200411 tune Disassembly (12225074)

Postby Dylan » Fri Nov 11, 2016 10:31 am

Thanks haven't got the V8 one too have you?

User avatar
Posts: 149
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT

Re: 12200411 tune Disassembly (12225074)

Postby Apples » Fri Nov 11, 2016 10:32 am

Found picture of OEM V6 Low res crank sensor.

OEM V6 sensor.jpg
OEM V6 sensor.jpg (89.73 KiB) Viewed 1638 times


This is the 24x conversion sensor wheel

24x conversion.png
24x conversion.png (33.35 KiB) Viewed 1638 times


now if I can make it fit a V6 balancer.

here is the 24x sensor wheel to degrees.

LS1 24X Crank.jpg
Don't make excuses. Make more horsepower.

Online
Posts: 3136
Joined: Mon Aug 02, 2010 6:35 pm

Re: 12200411 tune Disassembly (12225074)

Postby Dylan » Fri Nov 11, 2016 1:23 pm

There's a model can't remember the name of V6 with the 0411 and it takes the 18X 3X crank and 1X cam. I'll see if I kept the link or maybe you're onto it all ready. Haven't followed the V6 to much so looked over it quickly.

User avatar
Posts: 149
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT

Re: 12200411 tune Disassembly (12225074)

Postby Apples » Fri Nov 11, 2016 2:00 pm

I haven't seen a V6 using 18x 3x and 1x cam on a 411 from the factory.
that's not to say they don't exist.
Don't make excuses. Make more horsepower.

Online
Posts: 3136
Joined: Mon Aug 02, 2010 6:35 pm

Re: 12200411 tune Disassembly (12225074)

Postby Dylan » Fri Nov 11, 2016 2:22 pm

Fair chance I misread it. Would of been in the 1998 2002 era if it was.
Whats your plans anyway convert a V6 of yours to to the 0411? Once you have the trigger pattern sorted it's just like any other conversion.

User avatar
Posts: 149
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT

Re: 12200411 tune Disassembly (12225074)

Postby Apples » Fri Nov 11, 2016 3:58 pm

well my plan is to try and run a V6 with ls1 coils and 411 pcm with auto.
then later on add 3 bar mafless tune.
I want to do it with out opening and modding the pcm.
Don't make excuses. Make more horsepower.

Online
Posts: 3136
Joined: Mon Aug 02, 2010 6:35 pm

Re: 12200411 tune Disassembly (12225074)

Postby Dylan » Fri Nov 11, 2016 5:15 pm

Sounds good keep us posted. Those low res trace pictures you posted. Do you have the whole manual for those models or just those images? Any chance you could PM a copy if you do?

PreviousNext

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 1 guest