Ops! No disrespect Tazzi! I had no idea you are the other half of this thing. I speak for many when I say we are super excited about this interface. Looking forward to when it's available! I'm also happy to pay up front if it helps to bring this thing to market. I'm going to need two!NSFW wrote:Yes it's that device, and "another guy" is who posted that log.DavidBraley wrote:I see in the PCM Hammer log above that the recognized device is a OBDX Pro VT. Where can someone get one of these? Or is this the device that Pete is developing with another guy? [/url]
PCM Hammer P01 and P59 flash tool v015
- DavidBraley
- Posts: 172
- Joined: Thu Jun 07, 2018 8:15 am
- cars: 1948 GMC
- Location: Fort Collins, Colorado
Re: PCM Hammer - new ls1 flash tool
-David
I'm a machinist... because engineers need heroes too.
I'm a machinist... because engineers need heroes too.
Re: PCM Hammer - new ls1 flash tool
EDIT - zip file removed, new release published.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
Re: PCM Hammer - new ls1 flash tool
I'm not up on the C# side of things, where can I adjust the Timeout for the Allpro??
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer - new ls1 flash tool
Had my first p59 succesful read today boys! on the autel j2534
- Attachments
-
- basic success log.txt
- (20.27 KiB) Downloaded 170 times
Re: PCM Hammer - new ls1 flash tool
Right now, the values from Device.GetVpwTimeoutMilliseconds() are used for all devices, so that's the place to experiment.Gampy wrote:I'm not up on the C# side of things, where can I adjust the Timeout for the Allpro??
I think it was overly optimistic to assume that the same values would work for all of them, though. In a future release I'll make that virtual so that each device type can have its own timeout values. Might also add the ability to override timeout values in the .config file as well, so people can easily experiment and fine-tune.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
Re: PCM Hammer - new ls1 flash tool
Awesome, thank you.NSFW wrote:Right now, the values from Device.GetVpwTimeoutMilliseconds() are used for all devices, so that's the place to experiment.
I think it was overly optimistic to assume that the same values would work for all of them, though. In a future release I'll make that virtual so that each device type can have its own timeout values. Might also add the ability to override timeout values in the .config file as well, so people can easily experiment and fine-tune.
For giggles I just disabled 4x on the AllPro and albeit slow it completed first time Zero retries!
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 29
- Joined: Tue Nov 26, 2019 5:29 am
- cars: 2005 Suburban 1500 LT 5.3 Flex Fuel
2003 Suburban 1500 LT 5.3 Flex Fuel Parts motor
2001 Yukon XL Denali 1500 6.0L
Re: PCM Hammer - new ls1 flash tool
Did a full read with PCM Hammer 009 on the MX+. It seemed to go faster and it definitely looked different in the debug log. Here are the log tabs from the full read.
- Attachments
-
- Debug Log PCM009 MX+ test.txt
- (3.48 MiB) Downloaded 190 times
-
- Results Log PCM009 MX+ test.txt
- (68.31 KiB) Downloaded 184 times
Available tools:
VCX Nano GM wifi (VXDIAG NANO-PLUS-V1.2 2020.10) (STM32F407 VTG6 ARM brand processor)
VAS 6154 Clone (VW6154-V1.0 1850) Looks like the VCX Nano but not as complicated.
Mongoose ISO/CAN
VAGcom HEX+CAN (HC8198369 Rev. B)
Maxidas DS708
VCX Nano GM wifi (VXDIAG NANO-PLUS-V1.2 2020.10) (STM32F407 VTG6 ARM brand processor)
VAS 6154 Clone (VW6154-V1.0 1850) Looks like the VCX Nano but not as complicated.
Mongoose ISO/CAN
VAGcom HEX+CAN (HC8198369 Rev. B)
Maxidas DS708
-
- Posts: 29
- Joined: Tue Nov 26, 2019 5:29 am
- cars: 2005 Suburban 1500 LT 5.3 Flex Fuel
2003 Suburban 1500 LT 5.3 Flex Fuel Parts motor
2001 Yukon XL Denali 1500 6.0L
Re: PCM Hammer - new ls1 flash tool
Just test wrote with the MX+ on the PcmHammer010Preview1. Less than 2 minutes for a calibration update. Here are the logs.NSFW wrote:Can someone please try writing to a 1mb Intel P59 using the .zip file that's attached to this post:
viewtopic.php?f=42&t=6593&p=96765#p96760
If that works I'll put out a new release that contains the fix.
Thanks!
- Attachments
-
- PCM Hammer 010 Preview Results Log.txt
- (12.36 KiB) Downloaded 175 times
-
- PCM Hammer 010 Preview Debug Log.txt
- (268.92 KiB) Downloaded 180 times
Available tools:
VCX Nano GM wifi (VXDIAG NANO-PLUS-V1.2 2020.10) (STM32F407 VTG6 ARM brand processor)
VAS 6154 Clone (VW6154-V1.0 1850) Looks like the VCX Nano but not as complicated.
Mongoose ISO/CAN
VAGcom HEX+CAN (HC8198369 Rev. B)
Maxidas DS708
VCX Nano GM wifi (VXDIAG NANO-PLUS-V1.2 2020.10) (STM32F407 VTG6 ARM brand processor)
VAS 6154 Clone (VW6154-V1.0 1850) Looks like the VCX Nano but not as complicated.
Mongoose ISO/CAN
VAGcom HEX+CAN (HC8198369 Rev. B)
Maxidas DS708
Re: PCM Hammer - new ls1 flash tool
Thanks for confirming!
I'm satisifed now so I'm going to release a new build.
I'm satisifed now so I'm going to release a new build.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
Re: PCM Hammer - new ls1 flash tool
Did another read on my actual truck. Worked. I should mention, i have had to put both pcms in recovery mode to do a full read with my j2534. I had a diablo trinity tune on this one but I unmarried it and reverted back to stock.
Now for some logs
Now for some logs
- Attachments
-
- long debug04esv.txt
- (3.15 MiB) Downloaded 182 times